Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 7521 Top Searches

These results are ranked by popularity.

Error
C0511Description: Fusing failure (abnormally low fusing temperature 2) - The temperature detected by the Fusing Roller Sub Thermistor remains lower than 105°C for a given period of time during the standby state. - The temperature detected by the Fusing Roll
C133BDescription: Communication with option error - It is not possible to communicate with the Printer Board within a predetermined period of time during a print cycle.
C0000Description: Main Motor malfunction • The Main Motor (M1) Lock signal remains HIGH for a continuous 1-sec. period at any time 1 sec. after the Main Motor has started turning.
C0520Description: Fusing failure (abnormally high fusing temperature 2) - The temperature detected by the Fusing Roller Thermistor remains higher than 240°C for a given period of time.
C133DDescription: ROM check error - An error is detected of the flash ROM chip on the Fax Board when the Power Switch is turned ON.

Konica-Minolta Bizhub 7521 Common Errors

The most common error codes.

Error
C0511Description: Fusing failure (abnormally low fusing temperature 2) - The temperature detected by the Fusing Roller Sub Thermistor remains lower than 105°C for a given period of time during the standby state. - The temperature detected by the Fusing Roll
C133BDescription: Communication with option error - It is not possible to communicate with the Printer Board within a predetermined period of time during a print cycle.
C0000Description: Main Motor malfunction • The Main Motor (M1) Lock signal remains HIGH for a continuous 1-sec. period at any time 1 sec. after the Main Motor has started turning.
C0520Description: Fusing failure (abnormally high fusing temperature 2) - The temperature detected by the Fusing Roller Thermistor remains higher than 240°C for a given period of time.
C133DDescription: ROM check error - An error is detected of the flash ROM chip on the Fax Board when the Power Switch is turned ON.
C0511Description: Fusing failure (abnormally low fusing temperature 2) - The temperature detected by the Fusing Roller Sub Thermistor remains lower than 105°C for a given period of time during the standby state. - The temperature detected by the Fusing Roll
C133BDescription: Communication with option error - It is not possible to communicate with the Printer Board within a predetermined period of time during a print cycle.
C0000Description: Main Motor malfunction • The Main Motor (M1) Lock signal remains HIGH for a continuous 1-sec. period at any time 1 sec. after the Main Motor has started turning.
C0520Description: Fusing failure (abnormally high fusing temperature 2) - The temperature detected by the Fusing Roller Thermistor remains higher than 240°C for a given period of time.
C133DDescription: ROM check error - An error is detected of the flash ROM chip on the Fax Board when the Power Switch is turned ON.