Error |
---|
These results are ranked by popularity.
Error | |
---|---|
C-1105 | Description: The open/close operation is not completed within a specified period of time after the paper exit motor (M8) starts its operation. The paper exit home sensor (PS12) does not turn ON or OFF. |
C-E005 | Description: The message to the memory manager is incorrect. |
C-6721 | Description: The AGC is retried due to the decreased light volume of the exposure lamp. However, no error occurs. |
C-4707 | Description: One of the following APC errors is detected: • APC is not applicable. • The 12V DC power for the laser drive is not supplied. • MPC is wrong. • Due to the laser defective, the laser does not light up. Or, the index sensor cannot detect the l |
C-2202 | Description: An error of the EM signal is detected when a specified period of time elapses after the developing motor (M3) turns ON. |
The most common error codes.
Error | |
---|---|
C-1105 | Description: The open/close operation is not completed within a specified period of time after the paper exit motor (M8) starts its operation. The paper exit home sensor (PS12) does not turn ON or OFF. |
C-E005 | Description: The message to the memory manager is incorrect. |
C-6721 | Description: The AGC is retried due to the decreased light volume of the exposure lamp. However, no error occurs. |
C-4707 | Description: One of the following APC errors is detected: • APC is not applicable. • The 12V DC power for the laser drive is not supplied. • MPC is wrong. • Due to the laser defective, the laser does not light up. Or, the index sensor cannot detect the l |
C-2202 | Description: An error of the EM signal is detected when a specified period of time elapses after the developing motor (M3) turns ON. |
C-1105 | Description: The open/close operation is not completed within a specified period of time after the paper exit motor (M8) starts its operation. The paper exit home sensor (PS12) does not turn ON or OFF. |
C-E005 | Description: The message to the memory manager is incorrect. |
C-6721 | Description: The AGC is retried due to the decreased light volume of the exposure lamp. However, no error occurs. |
C-4707 | Description: One of the following APC errors is detected: • APC is not applicable. • The 12V DC power for the laser drive is not supplied. • MPC is wrong. • Due to the laser defective, the laser does not light up. Or, the index sensor cannot detect the l |
C-2202 | Description: An error of the EM signal is detected when a specified period of time elapses after the developing motor (M3) turns ON. |