Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Magicolor 7450 II Top Searches

These results are ranked by popularity.

Error
0314Description: Laser malfunction (Black) • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
3000Description: Main Motor's failure to turn • The Motor Lock signal remains HIGH for a predetermined continuous period of time while the Motor is turning.
C061Description: Hold job error/No Duplex unit • The Duplex Option is not installed, but it is required for printing the job held in the HDD.
0001Description: Main Motor turning at abnormal timing • The Motor Lock signal remains LOW for a predetermined continuous period of time while the Motor remains stationary.
0F34Description: Abnormally low toner density detected Yellow TCR Sensor • TC ratio in the developing machine, which is determined by Toner replenishing amount control mechanism, is 5 % or less for a given number of times consecutively.

Konica-Minolta Magicolor 7450 II Common Errors

The most common error codes.

Error
0314Description: Laser malfunction (Black) • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
3000Description: Main Motor's failure to turn • The Motor Lock signal remains HIGH for a predetermined continuous period of time while the Motor is turning.
C061Description: Hold job error/No Duplex unit • The Duplex Option is not installed, but it is required for printing the job held in the HDD.
0001Description: Main Motor turning at abnormal timing • The Motor Lock signal remains LOW for a predetermined continuous period of time while the Motor remains stationary.
0F34Description: Abnormally low toner density detected Yellow TCR Sensor • TC ratio in the developing machine, which is determined by Toner replenishing amount control mechanism, is 5 % or less for a given number of times consecutively.
0314Description: Laser malfunction (Black) • SOS signal is not detected even after the lapse of a given period of time after staring the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
3000Description: Main Motor's failure to turn • The Motor Lock signal remains HIGH for a predetermined continuous period of time while the Motor is turning.
0001Description: Main Motor turning at abnormal timing • The Motor Lock signal remains LOW for a predetermined continuous period of time while the Motor remains stationary.
C061Description: Hold job error/No Duplex unit • The Duplex Option is not installed, but it is required for printing the job held in the HDD.
0F34Description: Abnormally low toner density detected Yellow TCR Sensor • TC ratio in the developing machine, which is determined by Toner replenishing amount control mechanism, is 5 % or less for a given number of times consecutively.