Konica-Minolta Bizhub 554e Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 554e Top Searches

These results are ranked by popularity.

Error
CC156Description: DF ROM error. Upgrade of the firmware has not been successful.
C2A24Description: Toner cartridge new release failure. The status with the new cartridge is not cleared after the new toner cartridge is set.
CD010Description: Hard disk unformat. Unformatted hard disk is connected.
C3B08Description: IH input voltage error. • While the IH heater was ON, input power was at the high voltage detection value or over for more than the predetermined period of time. • While the IH heater was ON, input voltage was at the low power
C1003Description: PK communication error. When a communication error is detected between the FS control board (FSCB) and the punch control board (PKCB).

Konica-Minolta Bizhub 554e Common Errors

The most common error codes.

Error
CC156Description: DF ROM error. Upgrade of the firmware has not been successful.
C2A24Description: Toner cartridge new release failure. The status with the new cartridge is not cleared after the new toner cartridge is set.
CD010Description: Hard disk unformat. Unformatted hard disk is connected.
C3B08Description: IH input voltage error. • While the IH heater was ON, input power was at the high voltage detection value or over for more than the predetermined period of time. • While the IH heater was ON, input voltage was at the low power
C1003Description: PK communication error. When a communication error is detected between the FS control board (FSCB) and the punch control board (PKCB).
CC156Description: DF ROM error. Upgrade of the firmware has not been successful.
C2A24Description: Toner cartridge new release failure. The status with the new cartridge is not cleared after the new toner cartridge is set.
CD010Description: Hard disk unformat. Unformatted hard disk is connected.
C3B08Description: IH input voltage error. • While the IH heater was ON, input power was at the high voltage detection value or over for more than the predetermined period of time. • While the IH heater was ON, input voltage was at the low power
C1003Description: PK communication error. When a communication error is detected between the FS control board (FSCB) and the punch control board (PKCB).