Konica-Minolta Bizhub 552 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 552 Top Searches

These results are ranked by popularity.

Error
C2654Description: EEPROM access error (DC K) • The re-written data, which has been read out, checked and founded as error, is read out again and found as error. • The error was found when reading out the counter value.
C1183Description: Elevate drive malfunction • During downward movement, the tray 1 upper limit sensor (PS24) is turned OFF and the tray 1 lower limit sensor (PS21) is turned ON. • The elevate motor (M15) lock signal remains set to H
CD211Description: PCI-SDRAM DMA operation failure • Hardware related to the transfer of memory image of the printer control board (PRCB) fails to respond.
C1106Description: Side-staple stapler drive malfunction • The stapler position sensor/1/2/3/4 (PS50/ PS/51/PS52/PS53) is turned neither ON nor OFF even after the set period of time has elapsed after the 2 staples stapler movement mo
CA053Description: Controller start failure • A controller start failure is detected in the controller interface.

Konica-Minolta Bizhub 552 Common Errors

The most common error codes.

Error
C2654Description: EEPROM access error (DC K) • The re-written data, which has been read out, checked and founded as error, is read out again and found as error. • The error was found when reading out the counter value.
C1183Description: Elevate drive malfunction • During downward movement, the tray 1 upper limit sensor (PS24) is turned OFF and the tray 1 lower limit sensor (PS21) is turned ON. • The elevate motor (M15) lock signal remains set to H
CD211Description: PCI-SDRAM DMA operation failure • Hardware related to the transfer of memory image of the printer control board (PRCB) fails to respond.
C1106Description: Side-staple stapler drive malfunction • The stapler position sensor/1/2/3/4 (PS50/ PS/51/PS52/PS53) is turned neither ON nor OFF even after the set period of time has elapsed after the 2 staples stapler movement mo
CA053Description: Controller start failure • A controller start failure is detected in the controller interface.
C2654Description: EEPROM access error (DC K) • The re-written data, which has been read out, checked and founded as error, is read out again and found as error. • The error was found when reading out the counter value.
C1183Description: Elevate drive malfunction • During downward movement, the tray 1 upper limit sensor (PS24) is turned OFF and the tray 1 lower limit sensor (PS21) is turned ON. • The elevate motor (M15) lock signal remains set to H
CD211Description: PCI-SDRAM DMA operation failure • Hardware related to the transfer of memory image of the printer control board (PRCB) fails to respond.
C1106Description: Side-staple stapler drive malfunction • The stapler position sensor/1/2/3/4 (PS50/ PS/51/PS52/PS53) is turned neither ON nor OFF even after the set period of time has elapsed after the 2 staples stapler movement mo
CA053Description: Controller start failure • A controller start failure is detected in the controller interface.