Konica-Minolta Bizhub 4700P Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 4700P Top Searches

These results are ranked by popularity.

Error
952Description: A recoverable NVRAM Cyclic Redundancy Check (CRC) error occurred-n is the offset at which the error occurred.
121Description: 121.07 Fuser has been on for more than allowed after a gap blowout, and the temperature is still too cold. 121.08 Fuser was under temp when page was in fuser. 121.20 Fuser undertemp during steady state control. Can occur in printing or stand
964Description: Download Emulation Cyclic Redundancy Check (CRC) Error-checksum failure detected in the emulation header or emulation file.
31.60 ... 31.65Description: 31.60 Imaging unit smart chip error 31.61 Imaging unit I2C packet timeout 31.62 Imaging unit I2C packet has been sent but code timed-out on receiving the data (callback) 31.63 Imaging unit security error in the send challenge sequence 31.64
54Description: Network error

Konica-Minolta Bizhub 4700P Common Errors

The most common error codes.

Error
952Description: A recoverable NVRAM Cyclic Redundancy Check (CRC) error occurred-n is the offset at which the error occurred.
121Description: 121.07 Fuser has been on for more than allowed after a gap blowout, and the temperature is still too cold. 121.08 Fuser was under temp when page was in fuser. 121.20 Fuser undertemp during steady state control. Can occur in printing or stand
964Description: Download Emulation Cyclic Redundancy Check (CRC) Error-checksum failure detected in the emulation header or emulation file.
31.60 ... 31.65Description: 31.60 Imaging unit smart chip error 31.61 Imaging unit I2C packet timeout 31.62 Imaging unit I2C packet has been sent but code timed-out on receiving the data (callback) 31.63 Imaging unit security error in the send challenge sequence 31.64
54Description: Network error
952Description: A recoverable NVRAM Cyclic Redundancy Check (CRC) error occurred-n is the offset at which the error occurred.
121Description: 121.07 Fuser has been on for more than allowed after a gap blowout, and the temperature is still too cold. 121.08 Fuser was under temp when page was in fuser. 121.20 Fuser undertemp during steady state control. Can occur in printing or stand
964Description: Download Emulation Cyclic Redundancy Check (CRC) Error-checksum failure detected in the emulation header or emulation file.
31.60 ... 31.65Description: 31.60 Imaging unit smart chip error 31.61 Imaging unit I2C packet timeout 31.62 Imaging unit I2C packet has been sent but code timed-out on receiving the data (callback) 31.63 Imaging unit security error in the send challenge sequence 31.64
54Description: Network error