Konica-Minolta Bizhub 454e Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 454e Top Searches

These results are ranked by popularity.

Error
C1103Description: Alignment plate motor/Fr’s malfunction. • The alignment plate home sensor/F (PS108) is not unblocked after the set period of time has elapsed after the plate drive starts from the home position. • The alignment pla
CC190Description: Outline font load error. An error occurred while loading the outline font.
C6755Description: CIS gain adjustment failure. After the gain adjustment is performed at the start-up, the peak value of the output data is lower than a given value.
C3B03Description: IH malfunction (monitor) Though the IH heater is OFF, mechanically, the ON status is detected. (Malfunction of IH heater operation)
C11A1Description: Exit roller pressure/ retraction malfunction The pick up roller position sensor (PS105) is turned neither ON nor OFF even after the set period of time has elapsed after the exit roller li

Konica-Minolta Bizhub 454e Common Errors

The most common error codes.

Error
C1103Description: Alignment plate motor/Fr’s malfunction. • The alignment plate home sensor/F (PS108) is not unblocked after the set period of time has elapsed after the plate drive starts from the home position. • The alignment pla
CC190Description: Outline font load error. An error occurred while loading the outline font.
C6755Description: CIS gain adjustment failure. After the gain adjustment is performed at the start-up, the peak value of the output data is lower than a given value.
C3B03Description: IH malfunction (monitor) Though the IH heater is OFF, mechanically, the ON status is detected. (Malfunction of IH heater operation)
C11A1Description: Exit roller pressure/ retraction malfunction The pick up roller position sensor (PS105) is turned neither ON nor OFF even after the set period of time has elapsed after the exit roller li
C1103Description: Alignment plate motor/Fr’s malfunction. • The alignment plate home sensor/F (PS108) is not unblocked after the set period of time has elapsed after the plate drive starts from the home position. • The alignment pla
CC190Description: Outline font load error. An error occurred while loading the outline font.
C6755Description: CIS gain adjustment failure. After the gain adjustment is performed at the start-up, the peak value of the output data is lower than a given value.
C3B03Description: IH malfunction (monitor) Though the IH heater is OFF, mechanically, the ON status is detected. (Malfunction of IH heater operation)
C11A1Description: Exit roller pressure/ retraction malfunction The pick up roller position sensor (PS105) is turned neither ON nor OFF even after the set period of time has elapsed after the exit roller li