Konica-Minolta Bizhub 4050 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 4050 Top Searches

These results are ranked by popularity.

Error
B122Description: Device error (GA LOCAL SRAM)
5102-140.20Description: Main motor failure to turn Main motor took too long to stop.
3423-121.34Description: Fuser warm-up trouble Open fuser backup roll thermistor.
D004Description: Hard disk access error (connection failure) Unable to communicate between the hard disk and Controller board (CTLB).
1109-381.52Description: Stapler motor’s drive malfunction Motor stop error - the ejector motor kept on running some time after the motor was commanded to stop.

Konica-Minolta Bizhub 4050 Common Errors

The most common error codes.

Error
B122Description: Device error (GA LOCAL SRAM)
5102-140.20Description: Main motor failure to turn Main motor took too long to stop.
3423-121.34Description: Fuser warm-up trouble Open fuser backup roll thermistor.
D004Description: Hard disk access error (connection failure) Unable to communicate between the hard disk and Controller board (CTLB).
1109-381.52Description: Stapler motor’s drive malfunction Motor stop error - the ejector motor kept on running some time after the motor was commanded to stop.
B122Description: Device error (GA LOCAL SRAM)
5102-140.20Description: Main motor failure to turn Main motor took too long to stop.
3423-121.34Description: Fuser warm-up trouble Open fuser backup roll thermistor.
D004Description: Hard disk access error (connection failure) Unable to communicate between the hard disk and Controller board (CTLB).
1109-381.52Description: Stapler motor’s drive malfunction Motor stop error - the ejector motor kept on running some time after the motor was commanded to stop.