Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 4000P Top Searches

These results are ranked by popularity.

Error
42Description: Printer/cartridge mismatch
950Description: NVRAM mismatch failure-mismatch between controller board EEPROM and control panel mirror. ".xx" codes: • 00-29- mismatch between system and mirror • 30-60-mismatch between secure and system
111Description: 111.00 Pel clock check failed. 111.01 Downlevel ASIC detected. 111.31 Printhead never delivered HSYNCs. 111.32 Printhead lost HSYNCs. 111.40 Wrong printhead installed 111.50 Open-loop printhead error, open-loop sweep state. 111.51 111.52 Ope
955Description: The Code ROM or NAND flash failed the Cyclic Redundancy Check (CRC) or the NAND experienced an uncorrectable multi-bit failure. Replace the controller board.
31.46Description: Toner failed to replenish into the imaging unit

Konica-Minolta Bizhub 4000P Common Errors

The most common error codes.

Error
42Description: Printer/cartridge mismatch
950Description: NVRAM mismatch failure-mismatch between controller board EEPROM and control panel mirror. ".xx" codes: • 00-29- mismatch between system and mirror • 30-60-mismatch between secure and system
111Description: 111.00 Pel clock check failed. 111.01 Downlevel ASIC detected. 111.31 Printhead never delivered HSYNCs. 111.32 Printhead lost HSYNCs. 111.40 Wrong printhead installed 111.50 Open-loop printhead error, open-loop sweep state. 111.51 111.52 Ope
955Description: The Code ROM or NAND flash failed the Cyclic Redundancy Check (CRC) or the NAND experienced an uncorrectable multi-bit failure. Replace the controller board.
31.46Description: Toner failed to replenish into the imaging unit
42Description: Printer/cartridge mismatch
950Description: NVRAM mismatch failure-mismatch between controller board EEPROM and control panel mirror. ".xx" codes: • 00-29- mismatch between system and mirror • 30-60-mismatch between secure and system
111Description: 111.00 Pel clock check failed. 111.01 Downlevel ASIC detected. 111.31 Printhead never delivered HSYNCs. 111.32 Printhead lost HSYNCs. 111.40 Wrong printhead installed 111.50 Open-loop printhead error, open-loop sweep state. 111.51 111.52 Ope
955Description: The Code ROM or NAND flash failed the Cyclic Redundancy Check (CRC) or the NAND experienced an uncorrectable multi-bit failure. Replace the controller board.
31.46Description: Toner failed to replenish into the imaging unit