Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 368e Top Searches

These results are ranked by popularity.

Error
C6753Description: bizhub 368e/308e ASIC clock input error (back side) (When DF-704 is installed). When starting the machine, verification on reading and writing the predetermined value for image processing ASIC on dual scan image processing board (DSIPB) was
C0210Description: Transfer LCT lift failure (When PC-415 is installed). • The main tray upper limit sensor (PS136) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began. • The shifter s
C1145Description: Trailing edge stopper motor drive malfunction. The trailing edge stopper home position detection sensor (PS20) is not turned OFF (unblocked) or ON (blocked) even after the set period of time has elapsed
C3425Description: Fusing warm-up trouble. • Detected temperature of the heating roller temperature sensor (TEMS) does not go up a given range of temperature even after a lapse of given period of time at warm up. • The temperature detected by the heating rol
C4501Description: (bizhub 658e/558e/458e Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after starting the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adju

Konica-Minolta Bizhub 368e Common Errors

The most common error codes.

Error
C6753Description: bizhub 368e/308e ASIC clock input error (back side) (When DF-704 is installed). When starting the machine, verification on reading and writing the predetermined value for image processing ASIC on dual scan image processing board (DSIPB) was
C0210Description: Transfer LCT lift failure (When PC-415 is installed). • The main tray upper limit sensor (PS136) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began. • The shifter s
C1145Description: Trailing edge stopper motor drive malfunction. The trailing edge stopper home position detection sensor (PS20) is not turned OFF (unblocked) or ON (blocked) even after the set period of time has elapsed
C3425Description: Fusing warm-up trouble. • Detected temperature of the heating roller temperature sensor (TEMS) does not go up a given range of temperature even after a lapse of given period of time at warm up. • The temperature detected by the heating rol
C4501Description: (bizhub 658e/558e/458e Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after starting the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adju
C8302Description: bizhub 658e/558e/458e Cooling fan motor failure. The motor lock signal remains HIGH for a predetermined continuous period of time while the motor is turning.
C0210Description: Transfer LCT lift failure (When PC-415 is installed). • The main tray upper limit sensor (PS136) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began. • The shifter s
C1145Description: Trailing edge stopper motor drive malfunction. The trailing edge stopper home position detection sensor (PS20) is not turned OFF (unblocked) or ON (blocked) even after the set period of time has elapsed
C3425Description: Fusing warm-up trouble. • Detected temperature of the heating roller temperature sensor (TEMS) does not go up a given range of temperature even after a lapse of given period of time at warm up. • The temperature detected by the heating rol
C4501Description: (bizhub 658e/558e/458e Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after starting the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adju