Konica-Minolta Bizhub 363 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 363 Top Searches

These results are ranked by popularity.

Error
C5601Description: Engine control malfunction • Engine control malfunction is detected with port monitor control.
C11C0Description: Punch motor drive malfunction • The punch home sensor/1 (PS100) is not turned ON even after the set period of time has elapsed while the punch motor/1 (M100) is energized.
C0211Description: Manual feed up/down abnormality • Paper does not unblock the manual lift-up position sensor (PS83) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate
S-1Description: CCD gain adjustment failure -It is detected that the CCD clamp gain adjustment value is faulty.
C1150Description: Center-staple rear adjust drive motor malfunction • The center staple alignment home sensor/R (PS41) is turned neither ON nor OFF even after the set period of time has elapsed after the center staple alignm

Konica-Minolta Bizhub 363 Common Errors

The most common error codes.

Error
C5601Description: Engine control malfunction • Engine control malfunction is detected with port monitor control.
C11C0Description: Punch motor drive malfunction • The punch home sensor/1 (PS100) is not turned ON even after the set period of time has elapsed while the punch motor/1 (M100) is energized.
C0211Description: Manual feed up/down abnormality • Paper does not unblock the manual lift-up position sensor (PS83) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate
S-1Description: CCD gain adjustment failure -It is detected that the CCD clamp gain adjustment value is faulty.
C1150Description: Center-staple rear adjust drive motor malfunction • The center staple alignment home sensor/R (PS41) is turned neither ON nor OFF even after the set period of time has elapsed after the center staple alignm
C5601Description: Engine control malfunction • Engine control malfunction is detected with port monitor control.
C11C0Description: Punch motor drive malfunction • The punch home sensor/1 (PS100) is not turned ON even after the set period of time has elapsed while the punch motor/1 (M100) is energized.
C0211Description: Manual feed up/down abnormality • Paper does not unblock the manual lift-up position sensor (PS83) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate
S-1Description: CCD gain adjustment failure -It is detected that the CCD clamp gain adjustment value is faulty.
C1150Description: Center-staple rear adjust drive motor malfunction • The center staple alignment home sensor/R (PS41) is turned neither ON nor OFF even after the set period of time has elapsed after the center staple alignm