Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 361 Top Searches

These results are ranked by popularity.

Error
C-1107Description: FS-523: Stapler motor /Rr (M16) drive abnormality - The stapler home sensor /Rr (PS22) does not turn OFF within a specified period of time after M16 turns ON. - PS22 does not turn ON within a specified period of time after the OFF of PS22
C-3302Description: Fusing cooling fan /Rr (FM8) abnormality. - When FM8 is ON, an EM error signal is detected 3 times in succession within a specified period of time.
C-1118Description: FS-522: Exit paddle solenoid (SD2) drive abnormality. - While in the paddle evacuation, the exit paddle home sensor (PS11) does not turn ON within a specified period of time after SD2 turns ON. - While in the paper hold-down operation, PS1
C-3901Description: Inferior contact of the thermistor /1 (TH1) - While in the warm-up condition, when the thermistor /2 (TH2) detection temperature gets to the Ready temperature before the TH1 detection temperature, the TH1 detection temperature does not get
C-5001Description: Main body control board communication abnormality 1 - Communication abnormality between the overall control board (OACB) and the scanner drive board (SDB).

Konica-Minolta Bizhub 361 Common Errors

The most common error codes.

Error
C-1107Description: FS-523: Stapler motor /Rr (M16) drive abnormality - The stapler home sensor /Rr (PS22) does not turn OFF within a specified period of time after M16 turns ON. - PS22 does not turn ON within a specified period of time after the OFF of PS22
C-3302Description: Fusing cooling fan /Rr (FM8) abnormality. - When FM8 is ON, an EM error signal is detected 3 times in succession within a specified period of time.
C-1118Description: FS-522: Exit paddle solenoid (SD2) drive abnormality. - While in the paddle evacuation, the exit paddle home sensor (PS11) does not turn ON within a specified period of time after SD2 turns ON. - While in the paper hold-down operation, PS1
C-3901Description: Inferior contact of the thermistor /1 (TH1) - While in the warm-up condition, when the thermistor /2 (TH2) detection temperature gets to the Ready temperature before the TH1 detection temperature, the TH1 detection temperature does not get
C-5001Description: Main body control board communication abnormality 1 - Communication abnormality between the overall control board (OACB) and the scanner drive board (SDB).
C-1107Description: FS-523: Stapler motor /Rr (M16) drive abnormality - The stapler home sensor /Rr (PS22) does not turn OFF within a specified period of time after M16 turns ON. - PS22 does not turn ON within a specified period of time after the OFF of PS22
C-3302Description: Fusing cooling fan /Rr (FM8) abnormality. - When FM8 is ON, an EM error signal is detected 3 times in succession within a specified period of time.
C-1118Description: FS-522: Exit paddle solenoid (SD2) drive abnormality. - While in the paddle evacuation, the exit paddle home sensor (PS11) does not turn ON within a specified period of time after SD2 turns ON. - While in the paper hold-down operation, PS1
C-3901Description: Inferior contact of the thermistor /1 (TH1) - While in the warm-up condition, when the thermistor /2 (TH2) detection temperature gets to the Ready temperature before the TH1 detection temperature, the TH1 detection temperature does not get
C-5001Description: Main body control board communication abnormality 1 - Communication abnormality between the overall control board (OACB) and the scanner drive board (SDB).