Select an Error Code or Type an Error Code to begin searching
| Error |
|---|
| Error |
|---|
These results are ranked by popularity.
| Error | |
|---|---|
| C-4401 | Description: Laser drive board (LDB) abnormality. - When an overcurrent flows for laser output. |
| C-1121 | Description: PU: Punch motor (M1) drive abnormality. - The punch position sensors /1 (PS2) and /2 (PS3) do not turn OFF within a specified period of time after M1 turns ON. |
| C-2803 | Description: TCR output abnormality. - When the output ripple voltage of the TCR sensor (TCRS) is less than 0.5 V. |
| C-1003 | Description: FS-510 - Flash ROM abnormality. A checksum error of the flash ROM is detected. |
| C-6701 | Description: AOC abnormality. - AOC counter overflow |
The most common error codes.
| Error | |
|---|---|
| C-4401 | Description: Laser drive board (LDB) abnormality. - When an overcurrent flows for laser output. |
| C-1121 | Description: PU: Punch motor (M1) drive abnormality. - The punch position sensors /1 (PS2) and /2 (PS3) do not turn OFF within a specified period of time after M1 turns ON. |
| C-2803 | Description: TCR output abnormality. - When the output ripple voltage of the TCR sensor (TCRS) is less than 0.5 V. |
| C-1003 | Description: FS-510 - Flash ROM abnormality. A checksum error of the flash ROM is detected. |
| C-6701 | Description: AOC abnormality. - AOC counter overflow |
| C-4401 | Description: Laser drive board (LDB) abnormality. - When an overcurrent flows for laser output. |
| C-1121 | Description: PU: Punch motor (M1) drive abnormality. - The punch position sensors /1 (PS2) and /2 (PS3) do not turn OFF within a specified period of time after M1 turns ON. |
| C-2803 | Description: TCR output abnormality. - When the output ripple voltage of the TCR sensor (TCRS) is less than 0.5 V. |
| C-1003 | Description: FS-510 - Flash ROM abnormality. A checksum error of the flash ROM is detected. |
| C-6701 | Description: AOC abnormality. - AOC counter overflow |