Konica-Minolta Bizhub 36 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 36 Top Searches

These results are ranked by popularity.

Error
0F37Description: Abnormally high toner density detected TCR sensor TC ratio in the developing unit, which is determined by toner replenishing amount control mechanism, is a predetermined value or more for a given number of times consecutively.
0500Description: Fusing heaters trouble (center) • Detected temperature of the heating roller thermistor (TH2; center) does not go up a given range of temperature even after a lapse of given period of time at warm up. • The warm-up is not completed even aft
6793Description: Scanner communication error An undefined communication error occurs between the controller and the scanner.
C074Description: Engine ROM error ROM on the printer control board has error.
0B05Description: Malfunctioning of belt up/down movement (FS-529) • The belt position sensor (PS13) is not turned OFF after the set period of time has elapsed after the belt retract solenoid (SD5) is turned ON. • The belt position sensor (PS13) is not turne

Konica-Minolta Bizhub 36 Common Errors

The most common error codes.

Error
0F37Description: Abnormally high toner density detected TCR sensor TC ratio in the developing unit, which is determined by toner replenishing amount control mechanism, is a predetermined value or more for a given number of times consecutively.
0500Description: Fusing heaters trouble (center) • Detected temperature of the heating roller thermistor (TH2; center) does not go up a given range of temperature even after a lapse of given period of time at warm up. • The warm-up is not completed even aft
6793Description: Scanner communication error An undefined communication error occurs between the controller and the scanner.
C074Description: Engine ROM error ROM on the printer control board has error.
0B05Description: Malfunctioning of belt up/down movement (FS-529) • The belt position sensor (PS13) is not turned OFF after the set period of time has elapsed after the belt retract solenoid (SD5) is turned ON. • The belt position sensor (PS13) is not turne
0F37Description: Abnormally high toner density detected TCR sensor TC ratio in the developing unit, which is determined by toner replenishing amount control mechanism, is a predetermined value or more for a given number of times consecutively.
0500Description: Fusing heaters trouble (center) • Detected temperature of the heating roller thermistor (TH2; center) does not go up a given range of temperature even after a lapse of given period of time at warm up. • The warm-up is not completed even aft
6793Description: Scanner communication error An undefined communication error occurs between the controller and the scanner.
C074Description: Engine ROM error ROM on the printer control board has error.
0B05Description: Malfunctioning of belt up/down movement (FS-529) • The belt position sensor (PS13) is not turned OFF after the set period of time has elapsed after the belt retract solenoid (SD5) is turned ON. • The belt position sensor (PS13) is not turne