Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 3301P Top Searches

These results are ranked by popularity.

Error
54Description: Network error
111.00 ... 111.69Description: 111.00 Pel clock check failed. 111.01 Downlevel ASIC detected. 111.20 Mirror motor lock is asserted before the motor is turned on 111.30 Failed to identify the printhead. 111.31 Printhead never delivered HSYNCs. 111.32 Printhead lost HSYNCs.
31.66Description: Toner failed to replenish into the imaging unit
84Description: Imaging unit low
121.07 ... 121.37Description: 121.07 Fuser has been on for more than allowed after a gap blowout, and the temperature is still too cold. 121.08 Fuser was under temp when page was in fuser. 121.20 Fuser undertemp during steady state control. Can occur in printing or stand

Konica-Minolta Bizhub 3301P Common Errors

The most common error codes.

Error
54Description: Network error
111.00 ... 111.69Description: 111.00 Pel clock check failed. 111.01 Downlevel ASIC detected. 111.20 Mirror motor lock is asserted before the motor is turned on 111.30 Failed to identify the printhead. 111.31 Printhead never delivered HSYNCs. 111.32 Printhead lost HSYNCs.
31.66Description: Toner failed to replenish into the imaging unit
84Description: Imaging unit low
121.07 ... 121.37Description: 121.07 Fuser has been on for more than allowed after a gap blowout, and the temperature is still too cold. 121.08 Fuser was under temp when page was in fuser. 121.20 Fuser undertemp during steady state control. Can occur in printing or stand
54Description: Network error
111.00 ... 111.69Description: 111.00 Pel clock check failed. 111.01 Downlevel ASIC detected. 111.20 Mirror motor lock is asserted before the motor is turned on 111.30 Failed to identify the printhead. 111.31 Printhead never delivered HSYNCs. 111.32 Printhead lost HSYNCs.
31.66Description: Toner failed to replenish into the imaging unit
84Description: Imaging unit low
121.07 ... 121.37Description: 121.07 Fuser has been on for more than allowed after a gap blowout, and the temperature is still too cold. 121.08 Fuser was under temp when page was in fuser. 121.20 Fuser undertemp during steady state control. Can occur in printing or stand