Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 282 Top Searches

These results are ranked by popularity.

Error
C11A5Description: Saddle In & Out Guide Motor Failure - - See SD-507 service manual.
C2557Description: ATDC Sensor Failure - The scanning value of the ATDC Sensor is less than 7 % while the IU Motor is turning. - The scanning value of the ATDC Sensor is more than 19 % while the IU Motor is turning.
C0001Description: LCT Communication Failure - Due to a software malfunction, etc., the time on the watchdog timer has run out and a reset is performed.
C3451Description: Fusing Warm-Up Failure (Main) - The Fusing Roller Thermistor does not detect the required temperature within 30 sec. after a warmup cycle has begun; therefore, the copier does not complete the warm-up cycle. - The temperature of the Fusing
C0701Description: Manual Paper Size Detection Adjustment Failure - The control value of the Manual Paper Size Detection Unit does not fall within the specified range when an adjustment is made of manual paper size detection.

Konica-Minolta Bizhub 282 Common Errors

The most common error codes.

Error
C11A5Description: Saddle In & Out Guide Motor Failure - - See SD-507 service manual.
C2557Description: ATDC Sensor Failure - The scanning value of the ATDC Sensor is less than 7 % while the IU Motor is turning. - The scanning value of the ATDC Sensor is more than 19 % while the IU Motor is turning.
C0001Description: LCT Communication Failure - Due to a software malfunction, etc., the time on the watchdog timer has run out and a reset is performed.
C3451Description: Fusing Warm-Up Failure (Main) - The Fusing Roller Thermistor does not detect the required temperature within 30 sec. after a warmup cycle has begun; therefore, the copier does not complete the warm-up cycle. - The temperature of the Fusing
C0701Description: Manual Paper Size Detection Adjustment Failure - The control value of the Manual Paper Size Detection Unit does not fall within the specified range when an adjustment is made of manual paper size detection.
C11A5Description: Saddle In & Out Guide Motor Failure - - See SD-507 service manual.
C2557Description: ATDC Sensor Failure - The scanning value of the ATDC Sensor is less than 7 % while the IU Motor is turning. - The scanning value of the ATDC Sensor is more than 19 % while the IU Motor is turning.
C0001Description: LCT Communication Failure - Due to a software malfunction, etc., the time on the watchdog timer has run out and a reset is performed.
C3451Description: Fusing Warm-Up Failure (Main) - The Fusing Roller Thermistor does not detect the required temperature within 30 sec. after a warmup cycle has begun; therefore, the copier does not complete the warm-up cycle. - The temperature of the Fusing
C0701Description: Manual Paper Size Detection Adjustment Failure - The control value of the Manual Paper Size Detection Unit does not fall within the specified range when an adjustment is made of manual paper size detection.