Konica-Minolta Bizhub 240F Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 240F Top Searches

These results are ranked by popularity.

Error
08Description: RX Motor Error The machine checks the motor error signal in one second the motor starts driving. When the error signal is detected for continuous 300ms, this message will be displayed.
0BDescription: Fan Error The machine checks the fan error signal for three seconds in one second after the motor starts driving. When the error signal is detected for continuous 400ms, this message will be displayed.
18Description: Fuser Error (The number indicates the detailed error code) 0 The fuser did not become to the main motor driving temperature in 50 seconds after printing started. 1 The fuser did not become to the paper pick-up temperature in 50 seconds afte
1EDescription: Drum Cartridge Fuse Error The machine could not blow the fuse.
1XXYYDescription: System error: XX and YY are function returned values - This error occurs with firmware or hardware defect. Firmware defect will be recovered by updating it, but hardware defect needs its replacement.

Konica-Minolta Bizhub 240F Common Errors

The most common error codes.

Error
08Description: RX Motor Error The machine checks the motor error signal in one second the motor starts driving. When the error signal is detected for continuous 300ms, this message will be displayed.
0BDescription: Fan Error The machine checks the fan error signal for three seconds in one second after the motor starts driving. When the error signal is detected for continuous 400ms, this message will be displayed.
18Description: Fuser Error (The number indicates the detailed error code) 0 The fuser did not become to the main motor driving temperature in 50 seconds after printing started. 1 The fuser did not become to the paper pick-up temperature in 50 seconds afte
1EDescription: Drum Cartridge Fuse Error The machine could not blow the fuse.
1XXYYDescription: System error: XX and YY are function returned values - This error occurs with firmware or hardware defect. Firmware defect will be recovered by updating it, but hardware defect needs its replacement.
08Description: RX Motor Error The machine checks the motor error signal in one second the motor starts driving. When the error signal is detected for continuous 300ms, this message will be displayed.
0BDescription: Fan Error The machine checks the fan error signal for three seconds in one second after the motor starts driving. When the error signal is detected for continuous 400ms, this message will be displayed.
18Description: Fuser Error (The number indicates the detailed error code) 0 The fuser did not become to the main motor driving temperature in 50 seconds after printing started. 1 The fuser did not become to the paper pick-up temperature in 50 seconds afte
1EDescription: Drum Cartridge Fuse Error The machine could not blow the fuse.
1XXYYDescription: System error: XX and YY are function returned values - This error occurs with firmware or hardware defect. Firmware defect will be recovered by updating it, but hardware defect needs its replacement.