Error |
---|
These results are ranked by popularity.
Error | |
---|---|
C3752 | Description: Abnormally high fusing temperature (sub) - The temperature detected by the thermistor/2 (TH2) is over the specified temperature for more than the specified period of time after power is turned ON. |
CC163 | Description: Engine connection failure - The controller can not communicate with the engine control system. - Incorrect engine firmware is installed. |
C0211 | Description: Bypass tray up/down failure - While the bypass lift sensor (PS2) is in the OFF state after the power is turned ON, output is finished, or a paper jam is cleared, PS2 is not turned ON within the given time after the bypass pick-up solenoid ( |
C3851 | Description: Abnormally low fusing temperature (main) - The temperature detected by the thermistor/1 (TH1) is below the specified temperature for more than the specified period of time. |
CD301 | Description: EEPROM error - Contact the responsible people of KMBT before taking some countermeasures. |
The most common error codes.
Error | |
---|---|
C3752 | Description: Abnormally high fusing temperature (sub) - The temperature detected by the thermistor/2 (TH2) is over the specified temperature for more than the specified period of time after power is turned ON. |
CC163 | Description: Engine connection failure - The controller can not communicate with the engine control system. - Incorrect engine firmware is installed. |
C0211 | Description: Bypass tray up/down failure - While the bypass lift sensor (PS2) is in the OFF state after the power is turned ON, output is finished, or a paper jam is cleared, PS2 is not turned ON within the given time after the bypass pick-up solenoid ( |
C3851 | Description: Abnormally low fusing temperature (main) - The temperature detected by the thermistor/1 (TH1) is below the specified temperature for more than the specified period of time. |
CD301 | Description: EEPROM error - Contact the responsible people of KMBT before taking some countermeasures. |
C3752 | Description: Abnormally high fusing temperature (sub) - The temperature detected by the thermistor/2 (TH2) is over the specified temperature for more than the specified period of time after power is turned ON. |
CC163 | Description: Engine connection failure - The controller can not communicate with the engine control system. - Incorrect engine firmware is installed. |
C0211 | Description: Bypass tray up/down failure - While the bypass lift sensor (PS2) is in the OFF state after the power is turned ON, output is finished, or a paper jam is cleared, PS2 is not turned ON within the given time after the bypass pick-up solenoid ( |
C3851 | Description: Abnormally low fusing temperature (main) - The temperature detected by the thermistor/1 (TH1) is below the specified temperature for more than the specified period of time. |
CD301 | Description: EEPROM error - Contact the responsible people of KMBT before taking some countermeasures. |