These results are ranked by popularity.
| Error |
|
| C1141 | Description: Paddle motor’s drive malfunction
The upper paddle homeposition detection sensor (PS14) is not blocked or unblocked even after the set period of time has elapsed while the FNS paddle motor (M5) is turning. |
| C2A14 | Description: Drum unit/K new release failure
The status with the new unit is not cleared after the new drum unit is set. |
| C6105 | Description: Back side cleaning home sensor abnormality (normal)
At the time of operation other than the initial operation, the CIS cleaning sensor (PS7) error is detected. |
| C3922 | Description: Fusing sensor wire breaks detection (Edge of the heating roller)
After a predetermined period of time after the warm-up stage is started, the heating roller thermistor/1 (TH1) voltage does not decrease by predetermined steps (temperature ri |
| C0109 | Description: Tray 4 vertical transport motor turning at abnormal timing
• The motor lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary. • The motor lock signal remains LOW |
