Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 195 Top Searches

These results are ranked by popularity.

Error
CC163Description: Engine connection failure - The controller can not communicate with the engine control system. - Incorrect engine firmware is installed.
C0211Description: Bypass tray up/down failure - While the bypass lift sensor (PS2) is in the OFF state after the power is turned ON, output is finished, or a paper jam is cleared, PS2 is not turned ON within the given time after the bypass pick-up solenoid (
C3851Description: Abnormally low fusing temperature (main) - The temperature detected by the thermistor/1 (TH1) is below the specified temperature for more than the specified period of time.
CD301Description: EEPROM error - Contact the responsible people of KMBT before taking some countermeasures.
C03FFDescription: Faulty model setting - “Model Setting” of “Adjust” available from the Service mode is incorrectly set.

Konica-Minolta Bizhub 195 Common Errors

The most common error codes.

Error
CC163Description: Engine connection failure - The controller can not communicate with the engine control system. - Incorrect engine firmware is installed.
C0211Description: Bypass tray up/down failure - While the bypass lift sensor (PS2) is in the OFF state after the power is turned ON, output is finished, or a paper jam is cleared, PS2 is not turned ON within the given time after the bypass pick-up solenoid (
C3851Description: Abnormally low fusing temperature (main) - The temperature detected by the thermistor/1 (TH1) is below the specified temperature for more than the specified period of time.
CD301Description: EEPROM error - Contact the responsible people of KMBT before taking some countermeasures.
C03FFDescription: Faulty model setting - “Model Setting” of “Adjust” available from the Service mode is incorrectly set.
CC163Description: Engine connection failure - The controller can not communicate with the engine control system. - Incorrect engine firmware is installed.
C0211Description: Bypass tray up/down failure - While the bypass lift sensor (PS2) is in the OFF state after the power is turned ON, output is finished, or a paper jam is cleared, PS2 is not turned ON within the given time after the bypass pick-up solenoid (
C3851Description: Abnormally low fusing temperature (main) - The temperature detected by the thermistor/1 (TH1) is below the specified temperature for more than the specified period of time.
CD301Description: EEPROM error - Contact the responsible people of KMBT before taking some countermeasures.
C03FFDescription: Faulty model setting - “Model Setting” of “Adjust” available from the Service mode is incorrectly set.