Konica-Minolta Bizhub 190f Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 190f Top Searches

These results are ranked by popularity.

Error
T.4.1Description: No response to MPS/EOP/EOM. Poor phone lines caused the receiving unit to disconnect. Adjust the interval between CFR and data on Memory Switch 11. Try increasing the output levels on Memory Switch 11. It may also be necessary to adjust the
R.1.1Description: T1 time-out. The calling unit was not a fax machine or the transmitting unit is having difficulties.
R.5.2Description: Line noise or other problems prevented ECM reception.
T.5.3Description: EOR was received from the remote unit but further transmission was not possible. Adjust Memory Switch 15 for this problem.
T.4.2Description: RTN was received from the remote machine. After transmission began, poor line conditions developed. Try the call again. Attempt the solutions described for the T.4.1 error.

Konica-Minolta Bizhub 190f Common Errors

The most common error codes.

Error
T.4.1Description: No response to MPS/EOP/EOM. Poor phone lines caused the receiving unit to disconnect. Adjust the interval between CFR and data on Memory Switch 11. Try increasing the output levels on Memory Switch 11. It may also be necessary to adjust the
R.1.1Description: T1 time-out. The calling unit was not a fax machine or the transmitting unit is having difficulties.
R.5.2Description: Line noise or other problems prevented ECM reception.
T.5.3Description: EOR was received from the remote unit but further transmission was not possible. Adjust Memory Switch 15 for this problem.
T.4.2Description: RTN was received from the remote machine. After transmission began, poor line conditions developed. Try the call again. Attempt the solutions described for the T.4.1 error.
T.4.1Description: No response to MPS/EOP/EOM. Poor phone lines caused the receiving unit to disconnect. Adjust the interval between CFR and data on Memory Switch 11. Try increasing the output levels on Memory Switch 11. It may also be necessary to adjust the
R.1.1Description: T1 time-out. The calling unit was not a fax machine or the transmitting unit is having difficulties.
R.5.2Description: Line noise or other problems prevented ECM reception.
T.5.3Description: EOR was received from the remote unit but further transmission was not possible. Adjust Memory Switch 15 for this problem.
T.4.2Description: RTN was received from the remote machine. After transmission began, poor line conditions developed. Try the call again. Attempt the solutions described for the T.4.1 error.