Konica-Minolta Magicolor 1680MF Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Magicolor 1680MF Top Searches

These results are ranked by popularity.

Error
0500Description: Fuser warm-up failure • The thermistor /1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started.
13F0Description: Engine control failure • An undefined malfunction occurs in the engine section (PRCB, etc.).
0001Description: Transport motor malfunction • The motor lock signal remains HIGH for a predetermined consecutive period of time while the transport motor remains energized.
0502Description: Thermistor open-circuit failure • The temperature detected by the thermistor does not reach a predetermined level even after the lapse of a given period time after the warm-up cycle has been started.
14A3Description: IR lamp malfunction

Konica-Minolta Magicolor 1680MF Common Errors

The most common error codes.

Error
0500Description: Fuser warm-up failure • The thermistor /1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started.
13F0Description: Engine control failure • An undefined malfunction occurs in the engine section (PRCB, etc.).
0001Description: Transport motor malfunction • The motor lock signal remains HIGH for a predetermined consecutive period of time while the transport motor remains energized.
0502Description: Thermistor open-circuit failure • The temperature detected by the thermistor does not reach a predetermined level even after the lapse of a given period time after the warm-up cycle has been started.
14A3Description: IR lamp malfunction
0500Description: Fuser warm-up failure • The thermistor /1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started.
13F0Description: Engine control failure • An undefined malfunction occurs in the engine section (PRCB, etc.).
0001Description: Transport motor malfunction • The motor lock signal remains HIGH for a predetermined consecutive period of time while the transport motor remains energized.
0502Description: Thermistor open-circuit failure • The temperature detected by the thermistor does not reach a predetermined level even after the lapse of a given period time after the warm-up cycle has been started.
14A3Description: IR lamp malfunction