Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 161f Top Searches

These results are ranked by popularity.

Error
C133DDescription: ROM checksum error - A malfunction occurred in the ROM
C0045Description: Fuser fan motor error - The LOCK signal remains HIGH or LOW continuously for a predetermined period of time while the Cooling Fan Motor remains energized
C13F0Description: Laser error - The laser output exceeds the upper limit value. - The laser output remains lower than the lower limit value.
C0210Description: H. V. abnormal - The Drum Charge Monitor Voltage (HVC_MON) signal falls outside a predetermined range at any time after the lapse of a predetermined period of time after the Power Switch has been turned ON. - The Image Transfer Voltage Mo
C1468Description: Parameter Chip error - An Parameter Chip not written with initial data was detected.

Konica-Minolta Bizhub 161f Common Errors

The most common error codes.

Error
C133DDescription: ROM checksum error - A malfunction occurred in the ROM
C0045Description: Fuser fan motor error - The LOCK signal remains HIGH or LOW continuously for a predetermined period of time while the Cooling Fan Motor remains energized
C13F0Description: Laser error - The laser output exceeds the upper limit value. - The laser output remains lower than the lower limit value.
C0210Description: H. V. abnormal - The Drum Charge Monitor Voltage (HVC_MON) signal falls outside a predetermined range at any time after the lapse of a predetermined period of time after the Power Switch has been turned ON. - The Image Transfer Voltage Mo
C1468Description: Parameter Chip error - An Parameter Chip not written with initial data was detected.
C133DDescription: ROM checksum error - A malfunction occurred in the ROM
C0045Description: Fuser fan motor error - The LOCK signal remains HIGH or LOW continuously for a predetermined period of time while the Cooling Fan Motor remains energized
C13F0Description: Laser error - The laser output exceeds the upper limit value. - The laser output remains lower than the lower limit value.
C0210Description: H. V. abnormal - The Drum Charge Monitor Voltage (HVC_MON) signal falls outside a predetermined range at any time after the lapse of a predetermined period of time after the Power Switch has been turned ON. - The Image Transfer Voltage Mo
C1468Description: Parameter Chip error - An Parameter Chip not written with initial data was detected.