Konica-Minolta bizhub Pro 1200P Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta bizhub Pro 1200P Top Searches

These results are ranked by popularity.

Error
C-1306Description: 2nd tandem LS-505 paper cooling fan motor /Fr (FM1) rotation abnormality. Rotation abnormality detected continuously for the specified time during FM1 operation. 33-7
C-0506Description: 1st tandem PF-703 paper leading edge separation fan /Fr3 (FM11) rotation abnormality. The FM11EM error detection signal is detected twice in succession within a specified period of time after FM11 was turned ON. However, an error detection s
C-D010Description: Hard disk /1 (HDD1) overwrite erase execution. HDD overwrite erase is executed.
C-1509Description: SC roller release motor (M18) drive abnormality. The SC roller release operation has not been completed within a specified period of time after M18 turns ON. 35-4
C-0118Description: Abnormality of the power for the PF drive board (PFUDB) SD/CL of the PF-702/703. At the start, the error detection signal of the PFUDB solenoid/clutch ICP blowout is detected.

Konica-Minolta bizhub Pro 1200P Common Errors

The most common error codes.

Error
C-1306Description: 2nd tandem LS-505 paper cooling fan motor /Fr (FM1) rotation abnormality. Rotation abnormality detected continuously for the specified time during FM1 operation. 33-7
C-0506Description: 1st tandem PF-703 paper leading edge separation fan /Fr3 (FM11) rotation abnormality. The FM11EM error detection signal is detected twice in succession within a specified period of time after FM11 was turned ON. However, an error detection s
C-D010Description: Hard disk /1 (HDD1) overwrite erase execution. HDD overwrite erase is executed.
C-1509Description: SC roller release motor (M18) drive abnormality. The SC roller release operation has not been completed within a specified period of time after M18 turns ON. 35-4
C-0118Description: Abnormality of the power for the PF drive board (PFUDB) SD/CL of the PF-702/703. At the start, the error detection signal of the PFUDB solenoid/clutch ICP blowout is detected.
C-1306Description: 2nd tandem LS-505 paper cooling fan motor /Fr (FM1) rotation abnormality. Rotation abnormality detected continuously for the specified time during FM1 operation. 33-7
C-0506Description: 1st tandem PF-703 paper leading edge separation fan /Fr3 (FM11) rotation abnormality. The FM11EM error detection signal is detected twice in succession within a specified period of time after FM11 was turned ON. However, an error detection s
C-2217Description: Leakage at the mixing section is detected. When the toner pump motor (M28) is operating, the cup section toner remaining sensor (PS34) detects the toner being provided in succession for 20seconds.
C-2411Description: TCR sensor (TCRS) output abnormality 1. The TCRS output is detected more than 3.0V (153step) in printing.
C-D010Description: Hard disk /1 (HDD1) overwrite erase execution. HDD overwrite erase is executed.