Select an Error Code or Type an Error Code to begin searching
| Error |
|---|
| Error |
|---|
These results are ranked by popularity.
| Error | |
|---|---|
| 90.2:03 | Description: Diverter valves motor error, valves stalled in Low position |
| 59.7:14 | Description: CryptoAsic generic error |
| 09:09:11 | Description: USB cable of the Scanner is failing |
| 01.1:10 | Description: Error in the engine PCA |
| 39.11:01 | Description: Media unloaded (Advisory) Plot cut partially and part of the image is kept in the unloaded roll. This warning may happen in the following situations: • When an end of roll 1 is detected because end of media is glued to the core. • Paper ha |
The most common error codes.
| Error | |
|---|---|
| 90.2:03 | Description: Diverter valves motor error, valves stalled in Low position |
| 59.7:14 | Description: CryptoAsic generic error |
| 09:09:11 | Description: USB cable of the Scanner is failing |
| 01.1:10 | Description: Error in the engine PCA |
| 39.11:01 | Description: Media unloaded (Advisory) Plot cut partially and part of the image is kept in the unloaded roll. This warning may happen in the following situations: • When an end of roll 1 is detected because end of media is glued to the core. • Paper ha |
| 90.2:03 | Description: Diverter valves motor error, valves stalled in Low position |
| 59.7:14 | Description: CryptoAsic generic error |
| 09:09:11 | Description: USB cable of the Scanner is failing |
| 01.1:10 | Description: Error in the engine PCA |
| 39.11:01 | Description: Media unloaded (Advisory) Plot cut partially and part of the image is kept in the unloaded roll. This warning may happen in the following situations: • When an end of roll 1 is detected because end of media is glued to the core. • Paper ha |