HP DesignJet 8000s Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


HP DesignJet 8000s Top Searches

These results are ranked by popularity.

Error
1180Description: Pump/Wipe Motor Error Over current is detected in the pump/wipe motor drive circuit.
1330Description: Scan-Axis Motor Temperature Sensor Error The Scan-Axis Motor Temperature Sensor has detected abnormal temperatures (-22.5C or lower or 150C or higher).
1010Description: ATG/RSM Loading Error The program load from the Flash ROM on the Main PCA to the ASIC on the Main PCA or sum-check was not performed correctly and an error occurred.
144xDescription: Heater Error No heater sequence interrupt.
1109Description: EEPROM Error The parameters saved in the EEPROM on the Main PCA cannot be read correctly.

HP DesignJet 8000s Common Errors

The most common error codes.

Error
1180Description: Pump/Wipe Motor Error Over current is detected in the pump/wipe motor drive circuit.
1330Description: Scan-Axis Motor Temperature Sensor Error The Scan-Axis Motor Temperature Sensor has detected abnormal temperatures (-22.5C or lower or 150C or higher).
1010Description: ATG/RSM Loading Error The program load from the Flash ROM on the Main PCA to the ASIC on the Main PCA or sum-check was not performed correctly and an error occurred.
144xDescription: Heater Error No heater sequence interrupt.
1109Description: EEPROM Error The parameters saved in the EEPROM on the Main PCA cannot be read correctly.
1180Description: Pump/Wipe Motor Error Over current is detected in the pump/wipe motor drive circuit.
1330Description: Scan-Axis Motor Temperature Sensor Error The Scan-Axis Motor Temperature Sensor has detected abnormal temperatures (-22.5C or lower or 150C or higher).
1010Description: ATG/RSM Loading Error The program load from the Flash ROM on the Main PCA to the ASIC on the Main PCA or sum-check was not performed correctly and an error occurred.
144xDescription: Heater Error No heater sequence interrupt.
1109Description: EEPROM Error The parameters saved in the EEPROM on the Main PCA cannot be read correctly.