Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


HP DesignJet 2500CP Top Searches

These results are ranked by popularity.

Error
020010Description: Problem with fine movement of the Y-axis motor.
010020Description: The Checksum read on the Flash SIMM is incorrect.
010036Description: ADC Test Failure in the Main PCA A short circuit in the Y/X-axis or ANY stepper motor. This short circuit is causing some of the fuses in the Electronics Module to burn. Error data: 00000800 -Problem with the Y-axis. 00001000 -Problem with t
07xxxxDescription: Firmware Error.
010111Description: The content of the User configuration area of the EEROM is not valid when the printer is initialized.

HP DesignJet 2500CP Common Errors

The most common error codes.

Error
020010Description: Problem with fine movement of the Y-axis motor.
010020Description: The Checksum read on the Flash SIMM is incorrect.
010036Description: ADC Test Failure in the Main PCA A short circuit in the Y/X-axis or ANY stepper motor. This short circuit is causing some of the fuses in the Electronics Module to burn. Error data: 00000800 -Problem with the Y-axis. 00001000 -Problem with t
07xxxxDescription: Firmware Error.
010111Description: The content of the User configuration area of the EEROM is not valid when the printer is initialized.
020010Description: Problem with fine movement of the Y-axis motor.
010020Description: The Checksum read on the Flash SIMM is incorrect.
010036Description: ADC Test Failure in the Main PCA A short circuit in the Y/X-axis or ANY stepper motor. This short circuit is causing some of the fuses in the Electronics Module to burn. Error data: 00000800 -Problem with the Y-axis. 00001000 -Problem with t
07xxxxDescription: Firmware Error.
010111Description: The content of the User configuration area of the EEROM is not valid when the printer is initialized.