These results are ranked by popularity.
| Error | |
|---|---|
| 010102 | Description: Physical EEROM write and/or write operations failed. The EEROM data that is written does not match the data that is read. |
| 040xxx | Description: MIO Card Error |
| 020006 | Description: The refill position in the Y-axis is not calibrated. |
| 0000D8 | Description: Library Error. |
| 010035 | Description: One of the Stepper Motors has failed. Error data (oXABCDEF): If the value of each letter is o, then the component is OK. If the value of each letter is different from 0 then the component has failed. X -Electronics signal failed (ignore othe |
The most common error codes.
| Error | |
|---|---|
| 010102 | Description: Physical EEROM write and/or write operations failed. The EEROM data that is written does not match the data that is read. |
| 040xxx | Description: MIO Card Error |
| 020006 | Description: The refill position in the Y-axis is not calibrated. |
| 0000D8 | Description: Library Error. |
| 010035 | Description: One of the Stepper Motors has failed. Error data (oXABCDEF): If the value of each letter is o, then the component is OK. If the value of each letter is different from 0 then the component has failed. X -Electronics signal failed (ignore othe |
| 010102 | Description: Physical EEROM write and/or write operations failed. The EEROM data that is written does not match the data that is read. |
| 0000D8 | Description: Library Error. |
| 020006 | Description: The refill position in the Y-axis is not calibrated. |
| 040xxx | Description: MIO Card Error |
| 090004 | Description: PostScript installed without the Hard Disk Drive. |
