HP DesignJet 100 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


HP DesignJet 100 Top Searches

These results are ranked by popularity.

Error
95:04Description: Firmware Error (during Printhead Alignment).
66:02:2Description: Vertical clipping. May happen when multi-pick occurs and two sheets are loaded together and they do not completely overlap.
83:10Description: Sheet feeding failure.
11:11Description: Trailing Cable is badly connected.
56:10Description: Error during the calibration of the motor encoder system or a problem finding the zero position on the Encoder Disc.

HP DesignJet 100 Common Errors

The most common error codes.

Error
95:04Description: Firmware Error (during Printhead Alignment).
66:02:2Description: Vertical clipping. May happen when multi-pick occurs and two sheets are loaded together and they do not completely overlap.
83:10Description: Sheet feeding failure.
11:11Description: Trailing Cable is badly connected.
56:10Description: Error during the calibration of the motor encoder system or a problem finding the zero position on the Encoder Disc.
95:04Description: Firmware Error (during Printhead Alignment).
66:02:2Description: Vertical clipping. May happen when multi-pick occurs and two sheets are loaded together and they do not completely overlap.
83:10Description: Sheet feeding failure.
11:11Description: Trailing Cable is badly connected.
56:10Description: Error during the calibration of the motor encoder system or a problem finding the zero position on the Encoder Disc.