These results are ranked by popularity.
| Error | |
|---|---|
| 154E | Description: Velocity deviation error The cutter motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration.• Irregular load• Cutter motor encoder failure• Cutter motor failure• Cutter motor driver failure |
| 151B | Description: Over speed error The APG motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• APG encoder failure• APG motor driver failure |
| 1FE3 | Description: Missing device |
| 1125 | Description: CR HP detection error The CR HP SENSOR cannot detect the CR UNIT. Or the CR UNIT cannot detect the touching surface for the home position setting, so the home position cannot be set.• CR HP SENSOR failure • False detection of the home due to |
| 1620 | Description: Pressurizing initialization error The initialization process did not complete within a predetermined time period. |
The most common error codes.
| Error | |
|---|---|
| 154E | Description: Velocity deviation error The cutter motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration.• Irregular load• Cutter motor encoder failure• Cutter motor failure• Cutter motor driver failure |
| 151B | Description: Over speed error The APG motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• APG encoder failure• APG motor driver failure |
| 1FE3 | Description: Missing device |
| 1125 | Description: CR HP detection error The CR HP SENSOR cannot detect the CR UNIT. Or the CR UNIT cannot detect the touching surface for the home position setting, so the home position cannot be set.• CR HP SENSOR failure • False detection of the home due to |
| 1620 | Description: Pressurizing initialization error The initialization process did not complete within a predetermined time period. |
| 154E | Description: Velocity deviation error The cutter motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration.• Irregular load• Cutter motor encoder failure• Cutter motor failure• Cutter motor driver failure |
| 151B | Description: Over speed error The APG motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• APG encoder failure• APG motor driver failure |
| 1FE3 | Description: Missing device |
| 1125 | Description: CR HP detection error The CR HP SENSOR cannot detect the CR UNIT. Or the CR UNIT cannot detect the touching surface for the home position setting, so the home position cannot be set.• CR HP SENSOR failure • False detection of the home due to |
| 1620 | Description: Pressurizing initialization error The initialization process did not complete within a predetermined time period. |
