'

Epson SC-T7000 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson SC-T7000 Top Searches

These results are ranked by popularity.

Error
1623Description: Continuous revolution error The control terminal (Vre terminal) of the pressure motor driver has shorted out.
151FDescription: Lock error Connection failure of the APG motor.• The APG motor was driven at a speed abnormally slower than a predetermined one during operation.• Irregular load• APG encoder failure• APG motor failure
113BDescription: Over speed error The CR MOTOR was driven at a speed faster than a predetermined one during deceleration.• Irregular load• CR ENCODER failure• SUB BOARD is damaged.• CR MOTOR driver failure
1541Description: Cutter return error
122FDescription: Lock error The PF MOTOR was driven at a speed abnormally slower than a predetermined one during operation.• PF ENCODER cable disconnection• PF MOTOR cable disconnection• Irregular load• PF ENCODER failure• PF MOTOR failure

Epson SC-T7000 Common Errors

The most common error codes.

Error
1623Description: Continuous revolution error The control terminal (Vre terminal) of the pressure motor driver has shorted out.
151FDescription: Lock error Connection failure of the APG motor.• The APG motor was driven at a speed abnormally slower than a predetermined one during operation.• Irregular load• APG encoder failure• APG motor failure
113BDescription: Over speed error The CR MOTOR was driven at a speed faster than a predetermined one during deceleration.• Irregular load• CR ENCODER failure• SUB BOARD is damaged.• CR MOTOR driver failure
1541Description: Cutter return error
122FDescription: Lock error The PF MOTOR was driven at a speed abnormally slower than a predetermined one during operation.• PF ENCODER cable disconnection• PF MOTOR cable disconnection• Irregular load• PF ENCODER failure• PF MOTOR failure
1623Description: Continuous revolution error The control terminal (Vre terminal) of the pressure motor driver has shorted out.
151FDescription: Lock error Connection failure of the APG motor.• The APG motor was driven at a speed abnormally slower than a predetermined one during operation.• Irregular load• APG encoder failure• APG motor failure
113BDescription: Over speed error The CR MOTOR was driven at a speed faster than a predetermined one during deceleration.• Irregular load• CR ENCODER failure• SUB BOARD is damaged.• CR MOTOR driver failure
1541Description: Cutter return error
122FDescription: Lock error The PF MOTOR was driven at a speed abnormally slower than a predetermined one during operation.• PF ENCODER cable disconnection• PF MOTOR cable disconnection• Irregular load• PF ENCODER failure• PF MOTOR failure