These results are ranked by popularity.
Error | |
---|---|
159F | Description: Lock error Connection failure of the ATC MOTOR.• The ATC MOTOR was driven at a speed abnormally slower than a predetermined one during operation.• Irregular load• ATC MOTOR encoder failure• ATC MOTOR failure |
151B | Description: Over speed error The APG motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• APG encoder failure• APG motor driver failure |
1125 | Description: CR HP detection error The CR HP SENSOR cannot detect the CR UNIT. Or the CR UNIT cannot detect the touching surface for the home position setting, so the home position cannot be set.• CR HP SENSOR failure • False detection of the home due to |
153D | Description: Driving time-out error Abnormally-long driving duration of the PRESSURE ROLLER MOTOR was detected.• Irregular load• Firmware becomes out of control. |
122B | Description: Over speed error The PF MOTOR was driven at a speed faster than a predetermined one during deceleration.• PF irregular load• PF ENCODER failure• SUB-B BOARD is damaged.• PF MOTOR driver failure |
The most common error codes.
Error | |
---|---|
159F | Description: Lock error Connection failure of the ATC MOTOR.• The ATC MOTOR was driven at a speed abnormally slower than a predetermined one during operation.• Irregular load• ATC MOTOR encoder failure• ATC MOTOR failure |
151B | Description: Over speed error The APG motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• APG encoder failure• APG motor driver failure |
1125 | Description: CR HP detection error The CR HP SENSOR cannot detect the CR UNIT. Or the CR UNIT cannot detect the touching surface for the home position setting, so the home position cannot be set.• CR HP SENSOR failure • False detection of the home due to |
153D | Description: Driving time-out error Abnormally-long driving duration of the PRESSURE ROLLER MOTOR was detected.• Irregular load• Firmware becomes out of control. |
122B | Description: Over speed error The PF MOTOR was driven at a speed faster than a predetermined one during deceleration.• PF irregular load• PF ENCODER failure• SUB-B BOARD is damaged.• PF MOTOR driver failure |
159F | Description: Lock error Connection failure of the ATC MOTOR.• The ATC MOTOR was driven at a speed abnormally slower than a predetermined one during operation.• Irregular load• ATC MOTOR encoder failure• ATC MOTOR failure |
151B | Description: Over speed error The APG motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• APG encoder failure• APG motor driver failure |
1125 | Description: CR HP detection error The CR HP SENSOR cannot detect the CR UNIT. Or the CR UNIT cannot detect the touching surface for the home position setting, so the home position cannot be set.• CR HP SENSOR failure • False detection of the home due to |
153D | Description: Driving time-out error Abnormally-long driving duration of the PRESSURE ROLLER MOTOR was detected.• Irregular load• Firmware becomes out of control. |
122B | Description: Over speed error The PF MOTOR was driven at a speed faster than a predetermined one during deceleration.• PF irregular load• PF ENCODER failure• SUB-B BOARD is damaged.• PF MOTOR driver failure |