These results are ranked by popularity.
Error | |
---|---|
1614 | Description: Reel Unit undetectable error at the start of operation When the Reel Motor started to operate, it was detected that the Reel Unit status is different from that detected during mechanism initialization process. |
142E | Description: Circulation pump motor velocity deviation error When the circulation pump motor should speed up or slow down, it was driving at an abnormally high speed exceeding a predetermined velocity.• Overload• Failure of the circulation pump motor enc |
200A | Description: F/W load error Reading/decompressing the firmware has failed. |
151D | Description: APG Motor driving time-out error Abnormally-long driving duration of the APG Motor was detected.• Irregular load• Firmware becomes out of control. |
1229 | Description: PF Motor oscillation error The control terminal (Vre terminal) of the PF Motor driver has shorted out. |
The most common error codes.
Error | |
---|---|
1614 | Description: Reel Unit undetectable error at the start of operation When the Reel Motor started to operate, it was detected that the Reel Unit status is different from that detected during mechanism initialization process. |
142E | Description: Circulation pump motor velocity deviation error When the circulation pump motor should speed up or slow down, it was driving at an abnormally high speed exceeding a predetermined velocity.• Overload• Failure of the circulation pump motor enc |
200A | Description: F/W load error Reading/decompressing the firmware has failed. |
151D | Description: APG Motor driving time-out error Abnormally-long driving duration of the APG Motor was detected.• Irregular load• Firmware becomes out of control. |
1229 | Description: PF Motor oscillation error The control terminal (Vre terminal) of the PF Motor driver has shorted out. |
1614 | Description: Reel Unit undetectable error at the start of operation When the Reel Motor started to operate, it was detected that the Reel Unit status is different from that detected during mechanism initialization process. |
142E | Description: Circulation pump motor velocity deviation error When the circulation pump motor should speed up or slow down, it was driving at an abnormally high speed exceeding a predetermined velocity.• Overload• Failure of the circulation pump motor enc |
200A | Description: F/W load error Reading/decompressing the firmware has failed. |
151D | Description: APG Motor driving time-out error Abnormally-long driving duration of the APG Motor was detected.• Irregular load• Firmware becomes out of control. |
1229 | Description: PF Motor oscillation error The control terminal (Vre terminal) of the PF Motor driver has shorted out. |