'

Epson SC-S50600 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson SC-S50600 Top Searches

These results are ranked by popularity.

Error
1125Description: CR HP detection error The CR Unit does not respond to the CR HP Sensor, or the sensor failed to detect the home position.• CR HP Sensor failure• False detection of the home due to paper jam or any other obstacle• Misreading of the CR Scale•
1A50Description: I2C communication error between elements on ASIC and MAIN An I2C communication error has occurred in the Main Board.
1612Description: Roll Unit undetectable error at the start of operation When the ATC Motor started to operate, it was detected that the Roll Unit status is different from that detected during mechanism initialization process.
1430Description: Pump cap unit 1 Suction pump life error The Pump Cap Unit has reached the end of its service life. (The total number of revolutions of the Pump Motor has reached a predetermined limit)
1930Description: Pre Heater AD abnormal error A thermistor temperature out of a predetermined range was detected the predetermined number of times in a row.

Epson SC-S50600 Common Errors

The most common error codes.

Error
1125Description: CR HP detection error The CR Unit does not respond to the CR HP Sensor, or the sensor failed to detect the home position.• CR HP Sensor failure• False detection of the home due to paper jam or any other obstacle• Misreading of the CR Scale•
1A50Description: I2C communication error between elements on ASIC and MAIN An I2C communication error has occurred in the Main Board.
1612Description: Roll Unit undetectable error at the start of operation When the ATC Motor started to operate, it was detected that the Roll Unit status is different from that detected during mechanism initialization process.
1430Description: Pump cap unit 1 Suction pump life error The Pump Cap Unit has reached the end of its service life. (The total number of revolutions of the Pump Motor has reached a predetermined limit)
1930Description: Pre Heater AD abnormal error A thermistor temperature out of a predetermined range was detected the predetermined number of times in a row.
1125Description: CR HP detection error The CR Unit does not respond to the CR HP Sensor, or the sensor failed to detect the home position.• CR HP Sensor failure• False detection of the home due to paper jam or any other obstacle• Misreading of the CR Scale•
1A50Description: I2C communication error between elements on ASIC and MAIN An I2C communication error has occurred in the Main Board.
1612Description: Roll Unit undetectable error at the start of operation When the ATC Motor started to operate, it was detected that the Roll Unit status is different from that detected during mechanism initialization process.
1430Description: Pump cap unit 1 Suction pump life error The Pump Cap Unit has reached the end of its service life. (The total number of revolutions of the Pump Motor has reached a predetermined limit)
1930Description: Pre Heater AD abnormal error A thermistor temperature out of a predetermined range was detected the predetermined number of times in a row.