'

Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson SC-S30650 Top Searches

These results are ranked by popularity.

Error
141Description: Pump Motor reversing error The number of occurrences of reversing the Pump Motor has reached a predetermined limit.• The polarity of Pump Motor encoder cable is opposite.• The polarity of Pump Motor cable is opposite.
DxxyDescription: Service call for FW debugging This error is intended to be used in the product development stage. It is supposed to not occur with marketed product, but may occur due to an unexpected cause such as external noises.
1616Description: Roll Unit Board failure There is a problem with a specific bit on the board, which detects what device is connected to the board.
151BDescription: APG Motor over speed error The APG Motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• APG encoder failure• APG Motor driver failure
1934Description: Pre Heater power supply abnormal error 1 Cable disconnection, breaking, blowout of a fuse, or heater failure.

Epson SC-S30650 Common Errors

The most common error codes.

Error
141Description: Pump Motor reversing error The number of occurrences of reversing the Pump Motor has reached a predetermined limit.• The polarity of Pump Motor encoder cable is opposite.• The polarity of Pump Motor cable is opposite.
DxxyDescription: Service call for FW debugging This error is intended to be used in the product development stage. It is supposed to not occur with marketed product, but may occur due to an unexpected cause such as external noises.
1616Description: Roll Unit Board failure There is a problem with a specific bit on the board, which detects what device is connected to the board.
151BDescription: APG Motor over speed error The APG Motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• APG encoder failure• APG Motor driver failure
1934Description: Pre Heater power supply abnormal error 1 Cable disconnection, breaking, blowout of a fuse, or heater failure.
DxxyDescription: Service call for FW debugging This error is intended to be used in the product development stage. It is supposed to not occur with marketed product, but may occur due to an unexpected cause such as external noises.
1616Description: Roll Unit Board failure There is a problem with a specific bit on the board, which detects what device is connected to the board.
141Description: Pump Motor reversing error The number of occurrences of reversing the Pump Motor has reached a predetermined limit.• The polarity of Pump Motor encoder cable is opposite.• The polarity of Pump Motor cable is opposite.
1934Description: Pre Heater power supply abnormal error 1 Cable disconnection, breaking, blowout of a fuse, or heater failure.
151BDescription: APG Motor over speed error The APG Motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• APG encoder failure• APG Motor driver failure