'

Epson SC-S30600 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson SC-S30600 Top Searches

These results are ranked by popularity.

Error
1618Description: Roll/Reel Unit Board failure There is a problem with a specific bit on the board, which detects what device is connected to the board.
1434Description: Self-sealing valve life error The Self-sealing valve has reached the end of its service life.
200DDescription: System interrupt watchdog time-out error A system failure such as CPU failure, or defective cash has occurred.
113Description: CR Motor reversing error The number of occurrences of reversing the CR Motor has reached a predetermined limit.• The polarity of CR Encoder cable is opposite.• The polarity of CR Motor cable is opposite.• Slipping of the teeth of CR Timing B
1940Description: Platen Heater AD abnormal error A thermistor temperature out of a predetermined range was detected the predetermined number of times in a row.

Epson SC-S30600 Common Errors

The most common error codes.

Error
1618Description: Roll/Reel Unit Board failure There is a problem with a specific bit on the board, which detects what device is connected to the board.
1434Description: Self-sealing valve life error The Self-sealing valve has reached the end of its service life.
200DDescription: System interrupt watchdog time-out error A system failure such as CPU failure, or defective cash has occurred.
113Description: CR Motor reversing error The number of occurrences of reversing the CR Motor has reached a predetermined limit.• The polarity of CR Encoder cable is opposite.• The polarity of CR Motor cable is opposite.• Slipping of the teeth of CR Timing B
1940Description: Platen Heater AD abnormal error A thermistor temperature out of a predetermined range was detected the predetermined number of times in a row.
1618Description: Roll/Reel Unit Board failure There is a problem with a specific bit on the board, which detects what device is connected to the board.
1434Description: Self-sealing valve life error The Self-sealing valve has reached the end of its service life.
200DDescription: System interrupt watchdog time-out error A system failure such as CPU failure, or defective cash has occurred.
113Description: CR Motor reversing error The number of occurrences of reversing the CR Motor has reached a predetermined limit.• The polarity of CR Encoder cable is opposite.• The polarity of CR Motor cable is opposite.• Slipping of the teeth of CR Timing B
1940Description: Platen Heater AD abnormal error A thermistor temperature out of a predetermined range was detected the predetermined number of times in a row.