'

Epson AcuLaser C3800 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson AcuLaser C3800 Top Searches

These results are ranked by popularity.

Error
100Description: - Laser power has weakened. - SOS signal cannot be detected.
1110 ... 2000Description: 1110 ROM checksum error (bit 0 to 15) (font latter half) 1111 ROM checksum error (bit 16 to 31) (font latter half) 1120 ROM checksum error (bit 0 to 7) 1121 ROM checksum error (bit 8 to 15) 1122 ROM checksum error (bit 16 to 23) 1123 ROM che
300Description: - Abnormal high temperature was detected - The printer detected that the circuit for the Temp sensor is in failure - Abnormal low temperature was detected - Warm-up has not completed within the specified time - The lamp remains lit longer th
500Description: Abnormal rotation signal of Main/Sub/Deve Motor (DRIVE ASSY MAIN) or the PH Motor (DRIVE ASSY PH) is detected.
550Description: Abnormal rotation signal of the FAN MAIN/FAN DUP is detected.

Epson AcuLaser C3800 Common Errors

The most common error codes.

Error
100Description: - Laser power has weakened. - SOS signal cannot be detected.
1110 ... 2000Description: 1110 ROM checksum error (bit 0 to 15) (font latter half) 1111 ROM checksum error (bit 16 to 31) (font latter half) 1120 ROM checksum error (bit 0 to 7) 1121 ROM checksum error (bit 8 to 15) 1122 ROM checksum error (bit 16 to 23) 1123 ROM che
300Description: - Abnormal high temperature was detected - The printer detected that the circuit for the Temp sensor is in failure - Abnormal low temperature was detected - Warm-up has not completed within the specified time - The lamp remains lit longer th
500Description: Abnormal rotation signal of Main/Sub/Deve Motor (DRIVE ASSY MAIN) or the PH Motor (DRIVE ASSY PH) is detected.
550Description: Abnormal rotation signal of the FAN MAIN/FAN DUP is detected.
100Description: - Laser power has weakened. - SOS signal cannot be detected.
1110 ... 2000Description: 1110 ROM checksum error (bit 0 to 15) (font latter half) 1111 ROM checksum error (bit 16 to 31) (font latter half) 1120 ROM checksum error (bit 0 to 7) 1121 ROM checksum error (bit 8 to 15) 1122 ROM checksum error (bit 16 to 23) 1123 ROM che
300Description: - Abnormal high temperature was detected - The printer detected that the circuit for the Temp sensor is in failure - Abnormal low temperature was detected - Warm-up has not completed within the specified time - The lamp remains lit longer th
500Description: Abnormal rotation signal of Main/Sub/Deve Motor (DRIVE ASSY MAIN) or the PH Motor (DRIVE ASSY PH) is detected.
550Description: Abnormal rotation signal of the FAN MAIN/FAN DUP is detected.