Error |
---|
These results are ranked by popularity.
Error | |
---|---|
600 | Description: Output of the ADC Sensor inside the TRANSFER UNIT is decreased. |
610 | Description: High temperature, low temperature, or high humidity that goes out of bounds is detected. |
900 | Description: NV-RAM in the PWBA MCU error - Communication error between the PWBA MCU and the PWBA EEPROM, CRUM in the FUSER UNIT, CRUM in the TRANSFER UNIT, or the HVPS. |
901 | Description: Firmware error |
0000 ... 0799 | Description: CPU exception (controller or software failure) |
The most common error codes.
Error | |
---|---|
600 | Description: Output of the ADC Sensor inside the TRANSFER UNIT is decreased. |
610 | Description: High temperature, low temperature, or high humidity that goes out of bounds is detected. |
900 | Description: NV-RAM in the PWBA MCU error - Communication error between the PWBA MCU and the PWBA EEPROM, CRUM in the FUSER UNIT, CRUM in the TRANSFER UNIT, or the HVPS. |
901 | Description: Firmware error |
0000 ... 0799 | Description: CPU exception (controller or software failure) |
600 | Description: Output of the ADC Sensor inside the TRANSFER UNIT is decreased. |
610 | Description: High temperature, low temperature, or high humidity that goes out of bounds is detected. |
900 | Description: NV-RAM in the PWBA MCU error - Communication error between the PWBA MCU and the PWBA EEPROM, CRUM in the FUSER UNIT, CRUM in the TRANSFER UNIT, or the HVPS. |
901 | Description: Firmware error |
0000 ... 0799 | Description: CPU exception (controller or software failure) |