'

Epson SC-B6000 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson SC-B6000 Top Searches

These results are ranked by popularity.

Error
200DDescription: System interrupt watchdog time-out error A system failure such as CPU failure, or defective cash has occurred.
159BDescription: Over speed error The ATC Motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• ATC MOTOR encoder failure• APG MOTOR driver failure
14C0Description: DAMPER KIT error The DAMPER KIT has reached its end of specified life
1A26Description: RTC Access T/O error The RTC circuit on the MAIN BOARD malfunctions
1539Description: Oscillation error The control terminal (Vre terminal) of the PRESSURE ROLLER MOTOR driver has shorted out.

Epson SC-B6000 Common Errors

The most common error codes.

Error
200DDescription: System interrupt watchdog time-out error A system failure such as CPU failure, or defective cash has occurred.
159BDescription: Over speed error The ATC Motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• ATC MOTOR encoder failure• APG MOTOR driver failure
14C0Description: DAMPER KIT error The DAMPER KIT has reached its end of specified life
1A26Description: RTC Access T/O error The RTC circuit on the MAIN BOARD malfunctions
1539Description: Oscillation error The control terminal (Vre terminal) of the PRESSURE ROLLER MOTOR driver has shorted out.
200DDescription: System interrupt watchdog time-out error A system failure such as CPU failure, or defective cash has occurred.
159BDescription: Over speed error The ATC Motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• ATC MOTOR encoder failure• APG MOTOR driver failure
14C0Description: DAMPER KIT error The DAMPER KIT has reached its end of specified life
1A26Description: RTC Access T/O error The RTC circuit on the MAIN BOARD malfunctions
1539Description: Oscillation error The control terminal (Vre terminal) of the PRESSURE ROLLER MOTOR driver has shorted out.