'

Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson Stylus Pro 9600 Top Searches

These results are ranked by popularity.

Error
00020002Description: SDRAM error The printer causes this error and stops operation when it detects a bit error by the SDRAM memory check performed during the power-on sequence.
0001000ADescription: Carriage home position detection error The printer causes this error and stops operation if it cannot detect the Carriage home position or cannot detect it within a fixed time period during the power-on initialization operation or while per
0001002ADescription: CR ASIC ECU error • Malfunction of the firmware (invalid rewriting of the register) • The Main Board is damaged.
00000101Description: Life end of the CR Motor (includes the Ink Tubes) The number of Carriage movement cycles reached the specified upper limit. • Stylus Pro 7400/7450/7800/7880/7880C: 3,700,000 cycles • Stylus Pro 9400/9450/9800/9880/9880C: 6,300,000 cycles If
0EXXXXXXDescription: A time-lag of the RTC timer This error occurs when the printer failed to communicate with the RTC chip on the Main Board. • 0Exxyyzz: xx = Location where a compare error occurred (00 = LTMR1, 01 = LTMR0, 02 = MIN counter) yy = Setting value

Epson Stylus Pro 9600 Common Errors

The most common error codes.

Error
00020002Description: SDRAM error The printer causes this error and stops operation when it detects a bit error by the SDRAM memory check performed during the power-on sequence.
0001000ADescription: Carriage home position detection error The printer causes this error and stops operation if it cannot detect the Carriage home position or cannot detect it within a fixed time period during the power-on initialization operation or while per
0001002ADescription: CR ASIC ECU error • Malfunction of the firmware (invalid rewriting of the register) • The Main Board is damaged.
00000101Description: Life end of the CR Motor (includes the Ink Tubes) The number of Carriage movement cycles reached the specified upper limit. • Stylus Pro 7400/7450/7800/7880/7880C: 3,700,000 cycles • Stylus Pro 9400/9450/9800/9880/9880C: 6,300,000 cycles If
0EXXXXXXDescription: A time-lag of the RTC timer This error occurs when the printer failed to communicate with the RTC chip on the Main Board. • 0Exxyyzz: xx = Location where a compare error occurred (00 = LTMR1, 01 = LTMR0, 02 = MIN counter) yy = Setting value
00020002Description: SDRAM error The printer causes this error and stops operation when it detects a bit error by the SDRAM memory check performed during the power-on sequence.
0001000ADescription: Carriage home position detection error The printer causes this error and stops operation if it cannot detect the Carriage home position or cannot detect it within a fixed time period during the power-on initialization operation or while per
0001002ADescription: CR ASIC ECU error • Malfunction of the firmware (invalid rewriting of the register) • The Main Board is damaged.
00000101Description: Life end of the CR Motor (includes the Ink Tubes) The number of Carriage movement cycles reached the specified upper limit. • Stylus Pro 7400/7450/7800/7880/7880C: 3,700,000 cycles • Stylus Pro 9400/9450/9800/9880/9880C: 6,300,000 cycles If
0EXXXXXXDescription: A time-lag of the RTC timer This error occurs when the printer failed to communicate with the RTC chip on the Main Board. • 0Exxyyzz: xx = Location where a compare error occurred (00 = LTMR1, 01 = LTMR0, 02 = MIN counter) yy = Setting value