'

Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson Stylus Pro 7890 Top Searches

These results are ranked by popularity.

Error
1A37Description: Thermistor error The Head FFC is not connected correctly. The thermistor detects a temperature out of the specification. The thermistor is broken.
141BDescription: Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure
150Description: PG phase detection error During PG operation, the PG HP Sensor cannot detect the change of status.
2010Description: UART communication error Connection between the HEAD_B Board Assy and the Main Board Assy has an abnormality.
1537Description: Pressurizing error The motor driving does not end even after the specified period of time has passed.

Epson Stylus Pro 7890 Common Errors

The most common error codes.

Error
1A37Description: Thermistor error The Head FFC is not connected correctly. The thermistor detects a temperature out of the specification. The thermistor is broken.
141BDescription: Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure
150Description: PG phase detection error During PG operation, the PG HP Sensor cannot detect the change of status.
2010Description: UART communication error Connection between the HEAD_B Board Assy and the Main Board Assy has an abnormality.
1537Description: Pressurizing error The motor driving does not end even after the specified period of time has passed.
141BDescription: Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure
1A37Description: Thermistor error The Head FFC is not connected correctly. The thermistor detects a temperature out of the specification. The thermistor is broken.
150Description: PG phase detection error During PG operation, the PG HP Sensor cannot detect the change of status.
1101Description: CR life error The number of Carriage movement cycles reached the specified upper limit. (Ink tube’s life)
2010Description: UART communication error Connection between the HEAD_B Board Assy and the Main Board Assy has an abnormality.