'

Epson Stylus Pro 7700 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson Stylus Pro 7700 Top Searches

These results are ranked by popularity.

Error
1438Description: Maintenance tank error A Maintenance Tank for a wrong destination has been installed.
1A39Description: Head error The drive circuit in the Printhead is damaged due to a slant connection of the Head FFC, etc., or the fuse of the Main Board Assy may has blown because of such a wrong connection.
151FDescription: Lock error Detects that it is being driven at an irregularly slower speed than the specified value. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure
200DDescription: System interrupt watchdog time-out error A system failure such as CPU failure, defective cash or the like has occurred.
153BDescription: Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure

Epson Stylus Pro 7700 Common Errors

The most common error codes.

Error
1438Description: Maintenance tank error A Maintenance Tank for a wrong destination has been installed.
1A39Description: Head error The drive circuit in the Printhead is damaged due to a slant connection of the Head FFC, etc., or the fuse of the Main Board Assy may has blown because of such a wrong connection.
151FDescription: Lock error Detects that it is being driven at an irregularly slower speed than the specified value. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure
200DDescription: System interrupt watchdog time-out error A system failure such as CPU failure, defective cash or the like has occurred.
153BDescription: Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure
1438Description: Maintenance tank error A Maintenance Tank for a wrong destination has been installed.
1A39Description: Head error The drive circuit in the Printhead is damaged due to a slant connection of the Head FFC, etc., or the fuse of the Main Board Assy may has blown because of such a wrong connection.
151FDescription: Lock error Detects that it is being driven at an irregularly slower speed than the specified value. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure
200DDescription: System interrupt watchdog time-out error A system failure such as CPU failure, defective cash or the like has occurred.
153BDescription: Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure