These results are ranked by popularity.
Error | |
---|---|
E001 | Description: Main motor locked During the main motor rotation, the main motor encoder sensor does not detect the edge for 0.1 second. |
E020 | Description: Tape cluster cutter motor locked Tape cutting is defective. |
E002 | Description: Elevator motor locked While the elevator is moving up, the elevator top limit sensor does not pass light within 30 seconds. While the elevator is moving down, the elevator lower limit switch does not turn on within 30 seconds. |
E021 | Description: Communication with the tape cluster is not performed normally Communication between the main PCB and the tape cluster PCB is defective. |
E005 | Description: Ink roller up/down motor locked The ink roller up/down sensor does not detect the edge within 4 seconds after the ink roller up/down motor starts rotating. |
The most common error codes.
Error | |
---|---|
E001 | Description: Main motor locked During the main motor rotation, the main motor encoder sensor does not detect the edge for 0.1 second. |
E020 | Description: Tape cluster cutter motor locked Tape cutting is defective. |
E002 | Description: Elevator motor locked While the elevator is moving up, the elevator top limit sensor does not pass light within 30 seconds. While the elevator is moving down, the elevator lower limit switch does not turn on within 30 seconds. |
E021 | Description: Communication with the tape cluster is not performed normally Communication between the main PCB and the tape cluster PCB is defective. |
E005 | Description: Ink roller up/down motor locked The ink roller up/down sensor does not detect the edge within 4 seconds after the ink roller up/down motor starts rotating. |
E001 | Description: Main motor locked During the main motor rotation, the main motor encoder sensor does not detect the edge for 0.1 second. |
E020 | Description: Tape cluster cutter motor locked Tape cutting is defective. |
E002 | Description: Elevator motor locked While the elevator is moving up, the elevator top limit sensor does not pass light within 30 seconds. While the elevator is moving down, the elevator lower limit switch does not turn on within 30 seconds. |
E021 | Description: Communication with the tape cluster is not performed normally Communication between the main PCB and the tape cluster PCB is defective. |
E005 | Description: Ink roller up/down motor locked The ink roller up/down sensor does not detect the edge within 4 seconds after the ink roller up/down motor starts rotating. |