Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Duplo DPM420 Top Searches

These results are ranked by popularity.

Error
E001Description: • The main motor (M1) is defective. • The main PCB Unit is defective. • The encoder sensor (PS7) is defective.
E002Description: • The elevator motor (M2) is defective. • The elevator top limit sensor (PS9) is defective. • The elevator bottom limit switch (MS6) is defective. - The main PCB Unit is defective. • The elevator operation is defective.
E003Description: • The cutter motor is defective. • The cutter limit switch is defective. - The main PCB Unit is defective.
E004Description: • The lamp is defective. • The invertor unit is defective. • The CCD is defective. • Main PCB unit is defective.
E009Description: • The main PCB Unit is defective • The thermal head substrate is defective. • The thermal head is defective.

Duplo DPM420 Common Errors

The most common error codes.

Error
E001Description: • The main motor (M1) is defective. • The main PCB Unit is defective. • The encoder sensor (PS7) is defective.
E002Description: • The elevator motor (M2) is defective. • The elevator top limit sensor (PS9) is defective. • The elevator bottom limit switch (MS6) is defective. - The main PCB Unit is defective. • The elevator operation is defective.
E003Description: • The cutter motor is defective. • The cutter limit switch is defective. - The main PCB Unit is defective.
E004Description: • The lamp is defective. • The invertor unit is defective. • The CCD is defective. • Main PCB unit is defective.
E009Description: • The main PCB Unit is defective • The thermal head substrate is defective. • The thermal head is defective.
E001Description: • The main motor (M1) is defective. • The main PCB Unit is defective. • The encoder sensor (PS7) is defective.
E002Description: • The elevator motor (M2) is defective. • The elevator top limit sensor (PS9) is defective. • The elevator bottom limit switch (MS6) is defective. - The main PCB Unit is defective. • The elevator operation is defective.
E003Description: • The cutter motor is defective. • The cutter limit switch is defective. - The main PCB Unit is defective.
E004Description: • The lamp is defective. • The invertor unit is defective. • The CCD is defective. • Main PCB unit is defective.
E009Description: • The main PCB Unit is defective • The thermal head substrate is defective. • The thermal head is defective.