Canon iRC6880i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC6880i Top Searches

These results are ranked by popularity.

Error
E008-0001Description: There is an error in relation to the life of the fixing assembly. The counter reading for the fixing roller has exceeded a specific count
E537-8001Description: rear alignment error (Finisher-R1/R2) The home position sensor does not go off even when the swing motor has rotated for a specific period of time.
E001-0003Description: The rise in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the following: main thermistor (THM1, THM2, THM3), sub thermistor (THM4, THM5, THM6), or heater (H1, H2, H3, H4). The AC driver PCB
E350-0001Description: Fault in the soft ID PCB/function An error has occurred in the course of full data read operation on the soft ID PCB.
E073-0001Description: With the front door closed, the transfer drawer connector or the transfer frame drawer connector is not connected. The result of detecting the feed unit indicates the absence of the unit.

Canon iRC6880i Common Errors

The most common error codes.

Error
E008-0001Description: There is an error in relation to the life of the fixing assembly. The counter reading for the fixing roller has exceeded a specific count
E537-8001Description: rear alignment error (Finisher-R1/R2) The home position sensor does not go off even when the swing motor has rotated for a specific period of time.
E001-0003Description: The rise in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the following: main thermistor (THM1, THM2, THM3), sub thermistor (THM4, THM5, THM6), or heater (H1, H2, H3, H4). The AC driver PCB
E350-0001Description: Fault in the soft ID PCB/function An error has occurred in the course of full data read operation on the soft ID PCB.
E073-0001Description: With the front door closed, the transfer drawer connector or the transfer frame drawer connector is not connected. The result of detecting the feed unit indicates the absence of the unit.
E008-0001Description: There is an error in relation to the life of the fixing assembly. The counter reading for the fixing roller has exceeded a specific count
E537-8001Description: rear alignment error (Finisher-R1/R2) The home position sensor does not go off even when the swing motor has rotated for a specific period of time.
E001-0003Description: The rise in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the following: main thermistor (THM1, THM2, THM3), sub thermistor (THM4, THM5, THM6), or heater (H1, H2, H3, H4). The AC driver PCB
E350-0001Description: Fault in the soft ID PCB/function An error has occurred in the course of full data read operation on the soft ID PCB.
E073-0001Description: With the front door closed, the transfer drawer connector or the transfer frame drawer connector is not connected. The result of detecting the feed unit indicates the absence of the unit.