Canon iRC6880 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC6880 Top Searches

These results are ranked by popularity.

Error
E110-0002Description: There is a scanner motor error. The FG signal is not detected while the polygon scanner is rotating stably.
E733-0001Description: There is a printer communication error. There is a DDI-P communication error.
E020-xxF1Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The connector or the color toner supply clutch is not connected.
E5F6-8003Description: There is an error in saddle butting. The number of detection pulses of the paper pushing plate motor clock sensor drops below a specific number. The paper pushing plate motor (M8S) or the paper pushing plate motor clock sensor (PI1S) is fau
E020-xx11Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INIT control (service mode INISET-*) at time of initial setup, the Ref value is lower than 62. The ATR sensor is damaged or has an open ci

Canon iRC6880 Common Errors

The most common error codes.

Error
E110-0002Description: There is a scanner motor error. The FG signal is not detected while the polygon scanner is rotating stably.
E733-0001Description: There is a printer communication error. There is a DDI-P communication error.
E020-xxF1Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The connector or the color toner supply clutch is not connected.
E5F6-8003Description: There is an error in saddle butting. The number of detection pulses of the paper pushing plate motor clock sensor drops below a specific number. The paper pushing plate motor (M8S) or the paper pushing plate motor clock sensor (PI1S) is fau
E020-xx11Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INIT control (service mode INISET-*) at time of initial setup, the Ref value is lower than 62. The ATR sensor is damaged or has an open ci
E110-0002Description: There is a scanner motor error. The FG signal is not detected while the polygon scanner is rotating stably.
E733-0001Description: There is a printer communication error. There is a DDI-P communication error.
E020-xxF1Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The connector or the color toner supply clutch is not connected.
E5F6-8003Description: There is an error in saddle butting. The number of detection pulses of the paper pushing plate motor clock sensor drops below a specific number. The paper pushing plate motor (M8S) or the paper pushing plate motor clock sensor (PI1S) is fau
E020-xx11Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INIT control (service mode INISET-*) at time of initial setup, the Ref value is lower than 62. The ATR sensor is damaged or has an open ci