Canon iRC6870i Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC6870i Top Searches

These results are ranked by popularity.

Error
E002-0030Description: The rise in the temperature of the fixing assembly is not enough. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC con
E351-0000Description: There is an error in the main controller PCB (sub). At start-up, there is an error in the communication between main controller PCB (sub) and the main controller PCB (main).
E079-0002Description: The home position of the outside heating roller is not detected. The outside heating roller home position sensor does not go off. If there is an open circuit in the home position sensor of the outside heating roller home position sensor, th
E731Description: There is a UFR board error.
E020-xxD5Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INTI control (service mode INISET-*) at time of initial setup, the average of the light Ref values is 562 or higher. The ATR sensor is dam

Canon iRC6870i Common Errors

The most common error codes.

Error
E002-0030Description: The rise in the temperature of the fixing assembly is not enough. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC con
E351-0000Description: There is an error in the main controller PCB (sub). At start-up, there is an error in the communication between main controller PCB (sub) and the main controller PCB (main).
E079-0002Description: The home position of the outside heating roller is not detected. The outside heating roller home position sensor does not go off. If there is an open circuit in the home position sensor of the outside heating roller home position sensor, th
E731Description: There is a UFR board error.
E020-xxD5Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INTI control (service mode INISET-*) at time of initial setup, the average of the light Ref values is 562 or higher. The ATR sensor is dam
E002-0030Description: The rise in the temperature of the fixing assembly is not enough. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC con
E351-0000Description: There is an error in the main controller PCB (sub). At start-up, there is an error in the communication between main controller PCB (sub) and the main controller PCB (main).
E079-0002Description: The home position of the outside heating roller is not detected. The outside heating roller home position sensor does not go off. If there is an open circuit in the home position sensor of the outside heating roller home position sensor, th
E731Description: There is a UFR board error.
E020-xxD5Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INTI control (service mode INISET-*) at time of initial setup, the average of the light Ref values is 562 or higher. The ATR sensor is dam