These results are ranked by popularity.
Error | |
---|---|
E674-0001 | Description: There is an error in the fax board. The fax board is detected, but communication is not possible. |
E004-0010 | Description: There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. The |
E500-0001 | Description: There is a finisher communication error. There is an error in data communication. An error has been detected in terms of the number of errors or the duration of the error in the communication between copier and finisher. |
E743-0000 | Description: There is a DDI communication error. There is an SCI error. The reception data is faulty. A reception time-out condition has occurred. An SEQ timeout error has occurred. An SEQ time-out error has occurred. |
E540-8001 | Description: upper tray ascent/descent error (Finisher-R1/R2) upper tray ascent/descent motor clock error |
The most common error codes.
Error | |
---|---|
E674-0001 | Description: There is an error in the fax board. The fax board is detected, but communication is not possible. |
E004-0010 | Description: There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. The |
E500-0001 | Description: There is a finisher communication error. There is an error in data communication. An error has been detected in terms of the number of errors or the duration of the error in the communication between copier and finisher. |
E743-0000 | Description: There is a DDI communication error. There is an SCI error. The reception data is faulty. A reception time-out condition has occurred. An SEQ timeout error has occurred. An SEQ time-out error has occurred. |
E540-8001 | Description: upper tray ascent/descent error (Finisher-R1/R2) upper tray ascent/descent motor clock error |
E674-0001 | Description: There is an error in the fax board. The fax board is detected, but communication is not possible. |
E004-0010 | Description: There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. The |
E500-0001 | Description: There is a finisher communication error. There is an error in data communication. An error has been detected in terms of the number of errors or the duration of the error in the communication between copier and finisher. |
E743-0000 | Description: There is a DDI communication error. There is an SCI error. The reception data is faulty. A reception time-out condition has occurred. An SEQ timeout error has occurred. An SEQ time-out error has occurred. |
E540-8001 | Description: upper tray ascent/descent error (Finisher-R1/R2) upper tray ascent/descent motor clock error |