Canon iRC5880N Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC5880N Top Searches

These results are ranked by popularity.

Error
E020-xx11Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INIT control (service mode INISET-*) at time of initial setup, the Ref value is lower than 62. The ATR sensor is damaged or has an open ci
E584-0002Description: shutter unit error (Finisher-R1/R2) The shutter open/closed sensor does not go on (i.e., the shutter does not open).
E003-0051Description: After standby, the drop in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB
E400-0001Description: There is a DF communication error. There is a check sum error.
E110-0002Description: There is a scanner motor error. The FG signal is not detected while the polygon scanner is rotating stably.

Canon iRC5880N Common Errors

The most common error codes.

Error
E020-xx11Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INIT control (service mode INISET-*) at time of initial setup, the Ref value is lower than 62. The ATR sensor is damaged or has an open ci
E584-0002Description: shutter unit error (Finisher-R1/R2) The shutter open/closed sensor does not go on (i.e., the shutter does not open).
E003-0051Description: After standby, the drop in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB
E400-0001Description: There is a DF communication error. There is a check sum error.
E110-0002Description: There is a scanner motor error. The FG signal is not detected while the polygon scanner is rotating stably.
E020-xx11Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INIT control (service mode INISET-*) at time of initial setup, the Ref value is lower than 62. The ATR sensor is damaged or has an open ci
E584-0002Description: shutter unit error (Finisher-R1/R2) The shutter open/closed sensor does not go on (i.e., the shutter does not open).
E003-0051Description: After standby, the drop in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB
E400-0001Description: There is a DF communication error. There is a check sum error.
E110-0002Description: There is a scanner motor error. The FG signal is not detected while the polygon scanner is rotating stably.