These results are ranked by popularity.
Error | |
---|---|
E020-xxF1 | Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The connector or the color toner supply clutch is not connected. |
E001-0003 | Description: The rise in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the following: main thermistor (THM1, THM2, THM3), sub thermistor (THM4, THM5, THM6), or heater (H1, H2, H3, H4). The AC driver PCB |
E745 | Description: There is a TokenRing error. |
E540-8003 | Description: upper tray ascent/descent error (Finisher-R1/R2) safety switch activation |
E070-00xx | Description: There is an error in the detection of the ITB home position. xx=01: ITB home position sensor B, xx=02: ITB home position sensor A; only at ITB 1/1 speed; XX=00: no distinction The home position of the intermediate transfer belt is not detec |
The most common error codes.
Error | |
---|---|
E020-xxF1 | Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The connector or the color toner supply clutch is not connected. |
E001-0003 | Description: The rise in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the following: main thermistor (THM1, THM2, THM3), sub thermistor (THM4, THM5, THM6), or heater (H1, H2, H3, H4). The AC driver PCB |
E745 | Description: There is a TokenRing error. |
E540-8003 | Description: upper tray ascent/descent error (Finisher-R1/R2) safety switch activation |
E070-00xx | Description: There is an error in the detection of the ITB home position. xx=01: ITB home position sensor B, xx=02: ITB home position sensor A; only at ITB 1/1 speed; XX=00: no distinction The home position of the intermediate transfer belt is not detec |
E020-xxF1 | Description: There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The connector or the color toner supply clutch is not connected. |
E001-0003 | Description: The rise in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the following: main thermistor (THM1, THM2, THM3), sub thermistor (THM4, THM5, THM6), or heater (H1, H2, H3, H4). The AC driver PCB |
E745 | Description: There is a TokenRing error. |
E540-8003 | Description: upper tray ascent/descent error (Finisher-R1/R2) safety switch activation |
E070-00xx | Description: There is an error in the detection of the ITB home position. xx=01: ITB home position sensor B, xx=02: ITB home position sensor A; only at ITB 1/1 speed; XX=00: no distinction The home position of the intermediate transfer belt is not detec |